new clutch and basket!!

[StuJohnson]

Originally Posted by nambo-trev

Thanks Fred that was a big help. I've got access to a machine shop so ill just order it but at least I have the heads up!

Not to rain on your parade.
But if you have the smaller diameter hole basket and you get the larger Rekluse diameter one you won't be needing a machine shop...........

[nambo-trev]

Judging by what the instructions say they all come as the smaller one, you change it if need be the only variable is the ring gear(weird)

[StuJohnson]

That's good.
When I ordered mine from Rekluse they would not send it to me until I actually measured my old one.
I am sure you will be fine.

[nambo-trev]

Mine is 2 weeks out they said. None in Canada and only 5 in the states!

[Fred1956]

Originally Posted by nambo-trev

Judging by what the instructions say they all come as the smaller one

Exactly.......and if you measure it before you order, they'll machine it for free.. Yes it is weird but it is "one of those GasGas things"

[nambo-trev]

Bought the clutch basket from mark because he could get it to me faster than the local dealer at the same cost! I know sometimes prices fluctuate but man do I ever get good service and parts availability from gofasters. My local bike shop can't do what he helps me with so thanks mark!

[Fred1956]

Originally Posted by nambo-trev

Bought the clutch basket from mark because he could get it to me faster than the local dealer at the same cost! I know sometimes prices fluctuate but man do I ever get good service and parts availability from gofasters. My local bike shop can't do what he helps me with so thanks mark!

There ya go!

[nambo-trev]

Hey guys can anyone with a core manual tell me if the aftermarket throw out had a snap ring where it centres on the pressure plate??? Got it all together and didn't remeber seeing a groove at the end of the aftermarket rekluse throw out????

[nambo-trev]

On another note the kit is super slick, my stock ring gear was the right fitment for the new clutch basket. I had some serious wear on the oem basket no doubt the reason why I was going threw fibers so often. Anyway here's a few pics of the install.
If you look at the last pic you can see there is no room on the throw out for a snap ring because it is flush to the pressure plate. Was this others experience as well?

[Vindicator]

Could you please post some pics of the OEM basket wear ?