|
|
|||||||
| Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
12-22-2009, 12:04 PM
|
|||
|
|||
Minor leak from exhaust port help?
Hi guys,
i have got an 2002 ec 300 and it has a little leak. It is leaking from where the exhaust exits the engine port, it looks spring loaded but as a bit of play/movement in it. It may need a new gasket or gromet. what do you think? cheers 
|
|
#2
12-22-2009, 12:34 PM
|
||||
|
||||
|
Try replacing the spings and "o"rings....unless the exhaust spigot is cracked.
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
|
|
#3
12-23-2009, 12:02 PM
|
||||
|
||||
|
Or your pipe is bent and needs to be straightened out. Try some "chamber seal" if you don't want to mess with it. Works great.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs
|
|
#4
12-24-2009, 03:01 AM
|
|||
|
|||
|
see if the 8mm head bolts are loose my 05 300 loosened.
__________________
05 ec300 01 wr426 98 polaris trail boss
|
|
#5
12-24-2009, 06:05 AM
|
||||
|
||||
|
Obviously check nothing is broken. Typically the pipes don't fit exactly and pull one of the gasket o-rings out when the exhaust is put on. I have found the o-rings so difficult to fit correctly I stopped bothering and use high temp Silicon RTV to seal the joint instead.
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| ec 300 sub port | Gasgasogeros | Enduro Engine - 2 stroke | 13 | 10-24-2010 03:04 PM |
| How do I check port timing? | moff747 | Enduro Engine - 2 stroke | 1 | 04-08-2009 05:27 PM |
| FYI, check BDC piston/lower port clearance. | socalscott | Enduro Engine - 2 stroke | 3 | 11-26-2008 01:43 PM |
| Gas cap leak? | colinmc400 | Enduro Chassis & Body | 6 | 05-21-2007 07:09 AM |
Linear Mode
