Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-23-2020, 11:23 AM
acmetrapper62 acmetrapper62 is offline
Member
 
Join Date: Apr 2013
Posts: 23
Default 01 gasgas 250 ec jetting help

I have 01 gasgas 250 ec. I ride at around 1,500 feet ruffly. With 50:1 93 octane mix gas . It used to be 32 :1 and I want to change it to 50:1. The needle that was in it before was nozf with a 38 pilot and I could not read the other number for main jet. I have a needle laying around n1ef idk if it good for my bike or what jets to use with that needle . I just need some advise on what jet to go with the n1ef needle with 93 octane fuel 50:1 br8eg plug 1,500 feet


Reply With Quote


  #2  
Old 03-23-2020, 12:42 PM
hannesd hannesd is offline
Senior Member
 
Join Date: Jun 2010
Location: belgium,europe
Posts: 546
Default

have a look in the local jetting database.
look for the same bike, same altitude and se what they did and rear the comments on their setting.
http://www.gasgasrider.org/forum/sho...tting+database
Reply With Quote
  #3  
Old 03-23-2020, 07:44 PM
Zman's Avatar
Zman Zman is offline
Platinum Level Site Supporter
 
Join Date: Apr 2010
Location: Burbs of Chicago
Posts: 1,818
Default

According to older posts the n1ef is similar to a n1eg which works very well for GG bikes. You will find lots of info on both needles.
Reply With Quote
  #4  
Old 03-23-2020, 08:21 PM
frankinberg's Avatar
frankinberg frankinberg is offline
Platinum Level Site Supporter
 
Join Date: Jul 2012
Location: Brighton colorado
Posts: 264
Default

I have had gasgas sense 1998 we always run ltr needle which is a ddk needle worked great in a air Stryker 1 round top 172 Maine 42 pilot ddk needle 2 nod from top it will rip
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
GasGas factory, why terrible jetting? Davehuge Enduro Intake/Carburetion - 2 stroke 11 06-23-2019 07:42 AM
2011 GasGas EC 300 Jetting baseline Neels Enduro Intake/Carburetion - 2 stroke 4 11-24-2018 02:16 PM
GasGas ec250 2013 jetting? 28gasser250 Enduro Intake/Carburetion - 2 stroke 5 01-05-2014 06:16 PM
Jetting (needles) 2013 gasgas ec 250 nickp Enduro Intake/Carburetion - 2 stroke 7 11-03-2013 02:25 PM
JD Jetting KTM/GasGas fixmare Enduro Intake/Carburetion - 2 stroke 3 08-09-2012 06:03 AM




All times are GMT -5. The time now is 02:24 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org