|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
keihin PWK information wanted
Hi
Could someone point me at a diagrammatic and manual/tuning guide for my carby from a 2011 ec300 - its the Keihin PWK 36mm. (FK0261 WAV) I have looked and if it is under my nose I cant see it. Thanks in advance. |
#2
|
|||
|
|||
The 2011 owners manual (https://gasgas.com/en/manuals) only contains a correction table for various temperatures but no jetting chart.
The factory setting is a good point to start with. Change jetting according to temperature and altitude. You may find good jetting data here: http://www.gasgasrider.org/forum/showthread.php?t=2162 |
#3
|
||||
|
||||
The stock needle N1FE needs to be modified. First choosing some sturdy linesman pliers, cut into 2 or more equal lengths.
Problem 1/2 solved. NEDJ needle from an RM250 is my vote.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#4
|
||||
|
||||
Quote:
NECH here, when I can finally get out I'll sort out which needle notch |
#5
|
|||
|
|||
Thanks for reply guys.
As it turns out there is JD kit in this carb. I will stand down now. |
#6
|
|||
|
|||
Just as a side note, I went from JD to NECW and the bike run well but very aggressive. I then took the NECH, which is one full clip richer than the NECW and the bike runs a lot better now
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The Tire Thread - Please add your information | noobi | Enduro Chassis & Body | 37 | 07-26-2021 12:17 AM |
Information for clutch please | Cox76y | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 12-05-2017 10:05 PM |
Information please | NewB | GasGas Member Polls | 3 | 10-25-2007 09:36 PM |
FAQ Information Needed.... | webmaster | General Discussions & Announcements | 0 | 08-02-2006 11:28 AM |