GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-09-2014, 06:50 AM
Watty Watty is offline
Member
 
Join Date: Mar 2014
Location: uk
Posts: 26
Default 2012 starter gear how much !!!!!

Wow my starter sprocket that sits on the flywheel decided to break last weekend , quick call to gas gas uk and they are trying to relieve me of nearly ?200 just for the sprocket are they mad , does anyone know if there are any cross over parts from another bike that i can buy or am i just kicking it from now on ??

No company can justify charging that for a gear cog its about 50p worth of metal


Reply With Quote


  #2  
Old 10-13-2014, 01:30 PM
earlystock earlystock is offline
Member
 
Join Date: Apr 2014
Location: Odessa Wa, USA
Posts: 35
Default

I haven't had this problem yet knock on wood, but maybe check with a machinist shop, probably cost a fair amount depending on the shop and equipment they use, but I doubt it would be $200 in my experience. I had some yamaha hubs turned to accept bearings for my old ktm 620 and I think I only paid $50 for both hubs, but I am also a farmer so they see me more often then I care to admit lol.
Reply With Quote
  #3  
Old 10-13-2014, 02:41 PM
Boom Boom Boom Boom is offline
Senior Member
 
Join Date: Mar 2008
Location: Carlisle Pa
Posts: 176
Default

Do a search for posts by BobT on here.
His 2011 failed and he found other parts that worked for much less and done a post about it here.
__________________
2014 Sherco SEF 300-R
2014 Sherco ST 300
2013 Sherco X-ride
Reply With Quote
  #4  
Old 10-14-2014, 04:54 PM
stuart stuart is offline
Member
 
Join Date: Mar 2014
Posts: 51
Default

this bit ?

http://www.motocrosscenter.com/ecomm...ducts_id=36074
Reply With Quote
  #5  
Old 11-22-2014, 01:43 PM
krolik_21 krolik_21 is offline
Member
 
Join Date: Oct 2014
Posts: 8
Default

Hi. Look heere total modification cost for all about 100
http://www.gasgasrider.org/forum/showthread.php?t=18583
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 Scorpion gear and Homemade PFP adjuster wence Enduro Other... 13 06-22-2012 08:49 AM
2012 XC gear ratios ggalex General Discussions & Announcements 3 03-08-2012 09:05 PM
New Cylinder for 2012 - how will the starter attach? Keg General Discussions & Announcements 6 10-22-2011 11:15 PM
Starter clutch / gear problem iancp5 Enduro Engine 4 stroke (including EFI & Exhaust) 12 01-28-2011 02:45 PM




All times are GMT -5. The time now is 01:24 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org