|
|
|||||||
| Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
 |
|
|
Thread Tools | Display Modes |
|
#1
07-08-2013, 11:04 PM
|
|||
|
|||
Pipe Guard Options? P3, E-Line...
I have a scarey-naked pipe on my 2011 Race. I understand that nobody has the P3 guard. I prefer carbon fiber (Not interested in the Hyde).
E-Line has one for the 2011: http://www.elineaccessories.com/ecom...-stock-gg.html Are there any others for consideration? 
|
|
#2
07-08-2013, 11:31 PM
|
|||
|
|||
|
If you are handy with steel you could make a cage
   http://renz.co.za/shop/bike-protecti...aust-cage.html
__________________
2003 txt250 Pro 2013 Ossa 280i
|
|
#4
07-09-2013, 03:48 AM
|
||||
|
||||
|
I have a good connection here in Australia.
Haymer 22 on ebay. Tell them I sent ya. Here is a prototype I am about to try:   They are very sturdy and seem to be very good quality. Yet to try them as I have had my suspension sent away to be sorted. First ride tomorrow but hopefully I will not test the new pipe and guard then? Cheers Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E 
|
|
#5
07-09-2013, 04:17 AM
|
|||
|
|||
|
that looks like a nice substitute for P3. What is the price? Any links, cant find him on ebay.
Only small issue i see is that it does not appear to cover as much of the short bend as the P3, and i tend to hit that part quite often! Are you prepared to do a side by side comparison of the P3?
__________________
2003 txt250 Pro 2013 Ossa 280i
|
|
#6
07-09-2013, 04:44 AM
|
||||
|
||||
|
It seems to cover most of the small bend that I hit. I will get a shot of the pipe on the bike to show you the actual coverage.... looks ok to me.
The cost is around A$110 plus postage. Works for me, much thicker and better than P3 I reckon. Cheers Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E
|
|
#7
07-09-2013, 04:48 AM
|
||||
|
||||
|
Try haymer22 no space, in the Oz ebay.
Cheers Mark
__________________
Xr 250 ( first bike) 98 Rmx 2007 Gas gas 300(swapped for trials bike) 2008 280 Raga replica 2012 Gas gas ec 300 E
|
|
#8
07-09-2013, 05:00 AM
|
||||
|
||||
|
__________________
2012 - XC 300 Racing Seattle, WA
|
|
#9
07-09-2013, 05:02 AM
|
|||
|
|||
|
sounds good. The ones i have seen locally other than P3 were much thinner, so nice to hear these are thicker than p3 (and a bit cheaper!) I hope you have informed him that the key problem with P3 is slow production (mixed in with poor customer relations) so if he can solve that issue he will have a global market!
will this fit the 2007-2011 pipes? am failing to find him on ebay, but boy you guys sell a lot of hammers!!
__________________
2003 txt250 Pro 2013 Ossa 280i
|
|
#10
07-09-2013, 05:12 AM
|
|||
|
|||
|
__________________
2003 txt250 Pro 2013 Ossa 280i
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| E Line Pipe Guard | snaissidis | Enduro Product Reviews | 8 | 05-20-2009 06:47 PM |
Linear Mode
