|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2007 EC250 fork bush problem
Marzocchi 45mm forks
Hi all, I have a bit of play in the lower fork legs. I can move the lower fork legs a tiny bit - I thought it was the steering head bearings at first but on closer inspection it is the lower leg moving a bit in the upper suspension leg/sleeve (back and to). I believe this may be due to worn bushes so I bought Pyramid Parts kit (including new seals etc) but the lower bush was too big and would not fit. The upper bush was fine. I rang the local Gas Gas dealer and they tell me the lower bush is now obsolete and they are unable to get it any more. Does anyone have any advice as to where I can get the correct size lower bush? Or, is a small amount of play acceptable/normal? Many Thanks John UK
__________________
Retired EC 250 (2007) UK Last edited by JAD; 04-07-2022 at 02:00 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wild hp 450 2007 problem | Armaan | Other GasGas Bikes/Quads | 0 | 08-26-2015 02:39 PM |
2010 Sachs EC300 Fork Problem | Bradz | Enduro Suspension | 4 | 07-17-2010 03:21 PM |
Fork problem EC250 | darren | Enduro Suspension | 0 | 08-29-2008 11:40 AM |
2007 Ohlins fork EC250 valving | Leon_gasgas | Enduro Suspension | 12 | 02-01-2008 03:07 AM |
07 ec250 seat problem | greeny | Enduro Chassis & Body | 1 | 05-13-2007 08:49 AM |