Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > General Forums > General Discussions & Announcements

General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-14-2010, 07:23 AM
blanc blanc is offline
Senior Member
 
Join Date: Oct 2010
Posts: 178
Default 2011 GG Graphics?

Hi

I have just received the 2011 front fender and light for my 10. Who does good graphics for the 2011? I am hoping to use the white front with black rear and either black or red side panels. Any suggestions?


Reply With Quote


  #2  
Old 12-14-2010, 07:29 AM
mcnut's Avatar
mcnut mcnut is offline
Senior Member
 
Join Date: Aug 2010
Location: N. Manchester IN
Posts: 634
Default

Contact Throttle Jockey. Although they don't have GG listed on their site yet, they have the templates for the new bikes to do any custom graphics you like.
Reply With Quote
  #3  
Old 12-14-2010, 07:58 AM
jeffs2200 jeffs2200 is offline
Senior Member
 
Join Date: Aug 2010
Location: LaVernia Tx, (San Antonio)
Posts: 259
Default

Since were on the topic of graphics does anyone know where to get a # plate for the 2011 GasGas?

I like the way the headlight looks but I do not want to ride with it all the time or race Harescrambles with it. I have been known to end up hitting a tree with the # plate and would rather not have to buy a new headlight.

Also Bike graphics is has the graphics for a 2011 gasgas and they are giving a 25% christmas discount.

I am waiting for Dan to send me some samples so I can order my backgrounds.
Reply With Quote
  #4  
Old 12-14-2010, 08:08 AM
john01 john01 is offline
Senior Member
 
Join Date: Aug 2010
Location: Powhatan, VA
Posts: 991
Default

We ordered our 2010 front number plate from After Hours Cycles a sponsor here.
Reply With Quote
  #5  
Old 12-14-2010, 08:45 AM
blanc blanc is offline
Senior Member
 
Join Date: Oct 2010
Posts: 178
Default

Any photos of how the front looks minus the headlight.....I have searched bike graphics on google without success can someone post the link?
Reply With Quote
  #6  
Old 12-14-2010, 09:30 AM
JRH250XC's Avatar
JRH250XC JRH250XC is offline
Site Sponsor
 
Join Date: Aug 2010
Location: Chattanooga, TN
Posts: 51
Default

The guys a Powersports Graphics (PG) do a great job and they will make custom graphics if needed. Contact www.ridepg.com or your local dealer and they can probably get you a better deal.
__________________
Jeremy

www.battlecreekpowersports.com
423-942-9056
Jasper, TN

Last edited by JRH250XC; 12-14-2010 at 09:31 AM. Reason: wrong
Reply With Quote
  #7  
Old 12-14-2010, 07:49 PM
REVERUP's Avatar
REVERUP REVERUP is offline
Gold Level Site Supporter
 
Join Date: Aug 2006
Location: Bonney Lake, Washington USA
Posts: 1,269
Default

Quote:
Originally Posted by jeffs2200 View Post
Since were on the topic of graphics does anyone know where to get a # plate for the 2011 GasGas?

I like the way the headlight looks but I do not want to ride with it all the time or race Harescrambles with it. I have been known to end up hitting a tree with the # plate and would rather not have to buy a new headlight.

Also Bike graphics is has the graphics for a 2011 gasgas and they are giving a 25% christmas discount.

I am waiting for Dan to send me some samples so I can order my backgrounds.
I plan to use the previous Gas Gas number plate.

The previous Gas Gas DE/MC # plate is actually made by UFO and is a Yamaha copy. part # is 116447. ref# YA 02853001 Most Bike shops should be able to order you one. If you don't have the stock lower number plate bracket from an earlier DE/MC model you will need to fab something up.

I was looking at my 2011 and the front fender now mounts to the bottom triple clamp where the old number plate bracket mounted. They did this to make the front fender more ridged and not need the older style fender brace they used to have.
That may create a bit of a challenge to use the old numberplate bracket but it still may be a viable bottom plate mount, not sure yet. I will be checking it out closer soon. That DE plate should cover all the ugliness hidden under the light when the light shell is removed, the way the light mounts to the fender (hole) and the bottom triple clamp area has a weird mold.

Hope that made sense.

Roscoe
__________________

Huge thanks: GAS GAS OFFROAD US, Skagit Powersports, Cycle Gear, LTRacing, Scorpion Racing, users of GasGasrider.org, and CFMC!

Last edited by REVERUP; 12-14-2010 at 09:03 PM. Reason: Added reference number
Reply With Quote
  #8  
Old 12-14-2010, 09:33 PM
jeffs2200 jeffs2200 is offline
Senior Member
 
Join Date: Aug 2010
Location: LaVernia Tx, (San Antonio)
Posts: 259
Default

I was thinking about using a white KTM # plate because it will mount to the triple clamp on the top bolt but the shape at the fender is wrong. I assume GasGas has to make a # plate with the single post at the bottom and a srew at the top to attach to the triples.

I was shocked not to find one in the Go Fasters powerparts catalog. I would think a 125 race model would have a #plate instead of a headlight. I see no sense in having a headlight on a bike like that.

I think you could use KTM front fender and #plate combo but I like the look of the GG fender.
Reply With Quote
  #9  
Old 12-14-2010, 10:33 PM
MJC MJC is offline
Senior Member
 
Join Date: Oct 2010
Posts: 139
Default

Quote:
Originally Posted by jeffs2200 View Post
Since were on the topic of graphics does anyone know where to get a # plate for the 2011 GasGas.
I'm almost positive that the 09-11 Honda cr 450 # plate is an exact match for the 11 GasGas.
Reply With Quote
  #10  
Old 12-15-2010, 09:19 AM
blanc blanc is offline
Senior Member
 
Join Date: Oct 2010
Posts: 178
Default

I have contacted both parties mentioned, thank you. However neither have 2011 graphics on sale until next year. Does anyone here know where I may find same?
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2011 xc 300 odo/speedometer ? Muddy General Discussions & Announcements 48 07-22-2013 10:38 AM
2011 Mso - Us twowheels Enduro Product Reviews 9 12-02-2010 02:12 PM
2011 250 Six Days danielm General Discussions & Announcements 31 11-24-2010 02:13 PM
2011 ec 250 brit General Discussions & Announcements 1 10-06-2010 06:57 PM
2011 Gas Gas' gasgasman Pictures & Videos 10 05-13-2010 02:45 PM




All times are GMT -5. The time now is 09:18 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org