|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ec300 cylinder same from 2000-2019
I have a ec250 2018 and a ec300 2015. I want to change cylinder on the ec250 to a 300cc I have looked at the part lists and it has different part nr 2015-2018. But there are some s3 300cc cylinders on ebay and they claim that it fits 2000-2019. So are they any differences between the cylinders over the years or does a 2015 ec300 cylinder fit a 2018 ec250?
|
#2
|
||||
|
||||
The cylinders may be physically the same.
But there have been some power valve changes in the recent year models. |
#3
|
||||
|
||||
They are not physically "exactly " the same in the detail of the logo cast in the side of the barrel. The port timing may have changed, don't know. But S3 were probably happy with their variant and clearly kept it the same, so you'd have to assume that they are at least interchangeable. PV aside. But perhaps even those interchangeable if barrel the same.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#4
|
|||
|
|||
Quote:
|
#5
|
||||
|
||||
Certainly I don't need more power but it would be nice if the exhaust port floor was higher by like 5mm, one so the port was smaller there but also so people didn't get obsessed by raising the barrel to match piston at BDC which is odd for a fixation. Mind you, they would probably try grind the bottom then.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#6
|
|||
|
|||
Quote:
|
#7
|
||||
|
||||
Yeah so the floor being another few mm higher would likely be better still. Flow at full open is pretty sluggish.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#8
|
||||
|
||||
When the S3 barrels first came out on the 2013?s I think, I measured all the ports with my 04 cylinder and they were near as identical.
__________________
Back on a gassy! 2018 EC300! 🤘 Txt 280 07 to make me feel like a gumby again |
#9
|
|||
|
|||
Wonder if its possible to make it fit or if any1 knows exacly whats the difference between them.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2019 ec300 fuel | mrquick | Enduro Engine - 2 stroke | 76 | 09-29-2021 01:58 AM |
WTB tall seat for 2000 xc250 , wp43 cartridges,300 cylinder and head | 70455gto | "Wanted to Buy" & "Want To Trade" | 11 | 03-27-2020 01:26 PM |
2019 EC300 mods | Nightwind15 | General Discussions & Announcements | 9 | 06-27-2019 09:14 PM |
2019 ec300 | Saddleback51 | Enduro Intake/Carburetion - 2 stroke | 0 | 11-08-2018 12:26 PM |
Wanted: Piston/Ring, Cylinder Bore, Plastics for 2000 EC200 | flatout111 | "Wanted to Buy" & "Want To Trade" | 0 | 05-12-2013 05:34 PM |