Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 10-10-2018, 01:53 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default Fuel tap rebuild kit

Good folks. A mates tap is playing up, as is his float needle. Double whammy. He'd cleaned it all out but several rides later same thing but strangely his tap seems to be leaking like crazy on 'off'.
It emptied right down to reserve, so no, he hadn't turned it to reserve.

It dumped a complete tank in my van last year so I have a vested interest

I suspect the main seal will be damaged. Does anyone know the crossover or where to get a kit?


__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote


  #2  
Old 10-10-2018, 03:54 PM
Davehuge's Avatar
Davehuge Davehuge is offline
Senior Member
 
Join Date: May 2017
Location: English but now based in South of France.
Posts: 470
Default

Hi F5

Don't know about a seal kit/repair kit but here in Europe you can buy the complete tap and filter for 1996 to 2009 model for less than 18 euros.

GasGas part number is BE25610031

https://www.motocrosscenter.com/shop...0485-104x.html



The 2018 model fuel tap for just under 11 euros, GasGas part number BE76020GG-CLJ-1

https://www.motocrosscenter.com/shop...gg-clj-1.html#



I've never had a fuel tap apart, is it just O rings inside, if so could they be measured up to source replacements?

All the best, Dave.
Reply With Quote
  #3  
Old 10-10-2018, 07:07 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Thanks. It's a 2010 . They usually are just a wavey washer and a formed circle seal with holes in the right place. I guess 6 different sizes would cover 90% of bikes made since Indian Boardtrackers (facts and figures purely made up). I could pull the thing down and with a friendly shop match up with a 1998 KTM 250. For which I won't be able to get parts for anyway.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #4  
Old 10-11-2018, 03:12 AM
Davehuge's Avatar
Davehuge Davehuge is offline
Senior Member
 
Join Date: May 2017
Location: English but now based in South of France.
Posts: 470
Default

Just out of interest...

How is it sourcing GasGas parts in New Zealand. Do you have many dealers who stock parts or do you rely on ordering from websites?

Cheers, Dave.
Reply With Quote
  #5  
Old 10-11-2018, 04:39 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Um. . . Not too sure really, kinda buy most stuff aftermarket, but a couple of dedicated dealers stock things like water pump seals and shafts etc. Mate got a bendix last week ok.
Gee I guess I should check if it's a spare part. Wait right there. . .
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #6  
Old 10-11-2018, 04:49 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

No its not listed.

Hey! Why have I put this in the engine section? Thought it was in carb area, oh well.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #7  
Old 10-11-2018, 04:55 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by (F5) View Post
No its not listed.

Hey! Why have I put this in the engine section? Thought it was in carb area, oh well.
I'll move it for you!
Reply With Quote
  #8  
Old 10-11-2018, 04:28 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default fuel tap

Mine has been acting up with a minor drip, so tore it down, discovered no o-rings. Just one single piece or rubber w-3 holes and cover plate. I cleaned everything up ,ran some fuel through to clean the tank, reassembled and no issues. However I do have problems with the fuel lines not lasting 3 months tops. (helix fuel line from rocky mt.)
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #9  
Old 10-11-2018, 04:53 PM
Davehuge's Avatar
Davehuge Davehuge is offline
Senior Member
 
Join Date: May 2017
Location: English but now based in South of France.
Posts: 470
Default

Quote:
Originally Posted by john r b View Post
However I do have problems with the fuel lines not lasting 3 months tops. (helix fuel line from rocky mt.)
Can I ask exactly what fuel you're using?

Here in France I use 95 or 98 octane unleaded from supermarket pumps, but there's also cheaper E10 fuel available that contains 10% ethanol.

I won't use the fuel containing ethanol as it's known to deteriorate rubber and plastic, as used in fuel lines, seals, O rings, etc.

All the best, Dave.
Reply With Quote
  #10  
Old 10-11-2018, 05:07 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

Sunoco 100 oct Gtx plus I believe. from my local pump dealer.
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rebuild Kit joe gas gas Enduro Suspension 0 12-20-2015 03:46 PM
First top end rebuild on 07 300.. spooly Enduro Engine - 2 stroke 0 12-11-2014 04:14 AM
Top end rebuild forgiven Enduro Engine - 2 stroke 9 12-05-2013 11:01 AM
Can I do a rebuild myself? stix49 Enduro Suspension 5 09-06-2012 12:39 PM
Fuel range and fuel light sanderjavant Enduro Engine 4 stroke (including EFI & Exhaust) 6 01-05-2008 02:35 AM




All times are GMT -5. The time now is 04:35 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org