Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 01-29-2015, 12:01 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default Neater crossover thread?

Just wondering if you guys want to help put together a 'neater' crossover thread. Take screenshots and post images of information depicting crossovers.

I've put this thread in 'chassis' as most parts are going to be chassis, but please move mods if you see fit!

Please, no discussion.
Please, use images only (links always die eventually!)


Front Brake Pad Crossover
Attached Images
File Type: jpg front pad crossover.jpg (85.8 KB, 483 views)


__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote


  #2  
Old 01-29-2015, 12:10 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Rear Brake Pads Crossover
Attached Images
File Type: jpg rear1.jpg (85.6 KB, 250 views)
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #3  
Old 01-29-2015, 12:13 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Stator crossover (I know because I have this fitted to my bike), requires chopping of terminals.

from electrex.
Attached Images
File Type: jpg stator.jpg (92.1 KB, 257 views)
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #4  
Old 01-29-2015, 12:16 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Engine bearings and seals crossover ec300 2006

ITEM BRAND PART No
1 x SMALL END BEARING INA KBK 18x22x22

1 x LHS CRANK BEARING SKF NJ206ECP - C3 62x30x16
http://simplybearings.co.uk/shop/p19...duct_info.html
33.76+
1 x RHS CRANK BEARING SKF 63/28 - C3 28X68X18
http://simplybearings.co.uk/shop/p14...duct_info.html

1 x LHS CRANK SEAL KOK 20x35x6 - VITON
1 x RHS CRANK SEAL KOK 38x52x7 - VITON

1 x COUNTERSHAFT BEARING SKF 6305 - C3
1 x COUNTERSHAFT SEAL GENERIC 30x40x7

collar - 25x38x17
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #5  
Old 02-10-2015, 10:45 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Front brake parts, easier availability from Suzuki -

https://www.fowlersparts.co.uk/parts.../front-caliper
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #6  
Old 03-26-2015, 09:03 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

2011-15 GasGas

Front pads- EBC FA185
Rear Pads- EBC FA367

Last edited by gasgasman; 01-25-2016 at 09:47 PM.
Reply With Quote
  #7  
Old 08-02-2015, 05:30 PM
Hooligan Hooligan is offline
Member
 
Join Date: Aug 2014
Posts: 68
Default

Crossover Brake and Clutch Levers for 2010 EC250?
Reply With Quote
  #8  
Old 08-08-2015, 11:53 PM
GGRider01 GGRider01 is offline
Senior Member
 
Join Date: Jun 2015
Posts: 483
Default

Throttle cable for 2001 through (???) EC 300 is commonly found from the same year KTMs. It is MotionPro part number 10-3000.
Throttle tube for my 2001 EC 300 is MotionPro part number 01-0079
Plastic fork guards crossover with a lot of bikes with WP43 forks. Easiest to look up a 2003 CR250 and buy those guards.

Last edited by GGRider01; 08-12-2015 at 04:17 PM.
Reply With Quote
  #9  
Old 08-09-2015, 11:52 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

YZ kick lever weighs less than OEM and offers a better kicking motion.

2003 YZ250 two stroke.
Part # 5NX-15620-20
Reply With Quote
  #10  
Old 09-25-2015, 05:16 AM
RBrider's Avatar
RBrider RBrider is offline
Gold Level Site Supporter
 
Join Date: Sep 2015
Location: Fla & NC mtns
Posts: 333
Default '01 front brake

2001 Honda CR 250 front master cyl and caliper rebuild kits fit my '01 XC 200.

RB
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
My Go Pro HD Thread SideshowBob Pictures & Videos 18 04-25-2011 03:07 PM
thread jriley43 General Discussions & Announcements 15 03-17-2010 03:51 PM
Another Sprocket Thread Motarded1 Enduro Chassis & Body 1 06-09-2008 10:49 PM
New Ive been riding so much thread widebear General Discussions & Announcements 19 06-06-2008 08:00 AM
FAQ in suspension thread?? Link Enduro Suspension 6 10-04-2007 05:47 PM




All times are GMT -5. The time now is 06:16 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org