Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Other...


Reply
 
Thread Tools Display Modes
  #1  
Old 10-06-2016, 10:49 AM
stian stian is offline
Senior Member
 
Join Date: Sep 2013
Posts: 205
Default BTSL seal

Have a 05 250exc with bad crank seals. The standard part has a BTSL ending that I cannot find in my local bearingshop.

Does anyone know if a identical BA, BASL, B1 seal does the same?


__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350
Reply With Quote


  #2  
Old 10-06-2016, 12:10 PM
gasser's Avatar
gasser gasser is offline
Senior Member
 
Join Date: Nov 2006
Location: Cookeville, TN
Posts: 1,458
Default

Quote:
Originally Posted by stian View Post
Have a 05 250exc with bad crank seals. The standard part has a BTSL ending that I cannot find in my local bearingshop.

Does anyone know if a identical BA, BASL, B1 seal does the same?
The letters at the end of a bearing part number refer to the type of seal that bearing has. I would guess that "SL" at the end of your part number is an abbreviation for "single lip" meaning that it has only one contact point with the crank.
Reply With Quote
  #3  
Old 10-07-2016, 04:49 AM
stian stian is offline
Senior Member
 
Join Date: Sep 2013
Posts: 205
Default

Quote:
Originally Posted by gasser View Post
The letters at the end of a bearing part number refer to the type of seal that bearing has. I would guess that "SL" at the end of your part number is an abbreviation for "single lip" meaning that it has only one contact point with the crank.
I am familier with the combination of the seals listed, but the T in btsl puts me a bit of.
__________________
07` EC300SM. 09` KTM 250EXC. 70`CB350
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas cap rubber seal evanchochrek General Discussions & Announcements 6 10-13-2014 11:10 AM
Seal Size tonyraft Enduro Suspension 1 04-30-2014 03:22 AM
Has anyone on here used a seal mate? KTMAndy Off Road Racer's Corner 10 04-25-2012 12:15 AM
Seal sizes kendunn Enduro Chassis & Body 0 12-19-2010 09:22 PM
Crank Seal kim Enduro Engine - 2 stroke 2 05-18-2008 09:41 PM




All times are GMT -5. The time now is 05:33 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org