|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Keihin PWK needle jet size? (not the needle it self)
Hi there!
I?m just curious... I fitted a NEDJ needle instead of the standard N1EF in my AS2 in the 2011 Gas Gas EC300, and by eye, I could not tell the two apart. Measuring the diameter in every 5:th mm along the length gave this result in millimeters, starting at the thick part: Edit: Got the 2.91 figure from Erhard and by that calculated the diffecence in gap where the fuel flows between seat / needle and added to the table. N1EF NEDJ Diff (area in fuel gap) 2.70 2.74 0,04 (19.4% smaller) 2.69 2.73 0,04 (18.5% smaller) 2.69 2.73 0,04 (18.5% smaller) 2.64 2.65 0,01 (3.7% smaller) 2.55 2.57 0,02 (5.4% smaller) 2.41 2.43 0,02 (3.7% smaller) 2.28 2.29 0,01 (1.4% smaller) 2.07 2.10 0,03 (3.0% smaller) 1.79 1.85 0,06 (4.2% smaller) 1.53 1.57 0,04 (2.0% smaller) At idle or very small throttle openings the difference is only 0.04 mm and that is a pretty darn small difference! Does anyone know the diameter of the hole that the needel sticks in to? It would be interesting to calulate the area difference. Cheers! /David
__________________
Gasgas EC300 Sixdays 2011 Last edited by David v; 12-05-2014 at 08:26 AM. Reason: Added the area diff in % thanks to Erhards reply =) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Needle Help | Jacob 'Berg | Enduro Intake/Carburetion - 2 stroke | 23 | 08-11-2014 10:28 AM |
Needle for 300 | BryanMcc | Enduro Intake/Carburetion - 2 stroke | 2 | 10-06-2012 02:43 PM |
ec 300 cck needle | alun | Enduro Intake/Carburetion - 2 stroke | 3 | 12-29-2011 02:53 PM |
CHN Needle | nsgasser | Enduro Intake/Carburetion - 2 stroke | 3 | 05-21-2011 11:18 PM |
CCK needle | pevs | Enduro Intake/Carburetion - 2 stroke | 2 | 02-25-2010 02:04 PM |