Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-04-2020, 07:35 PM
mvidlak mvidlak is offline
Member
 
Join Date: Apr 2019
Posts: 4
Lightbulb ec300 clutch crossover

Sorry if it's here already. I've read through a lot about ec clutches here but couldn't find the answer.
I have 2011 ec300.
Finally killed my clutch plates got barnett plates and when I was in there I figured I should get a new basket and probably hub.
I got rekluse basket - looks great, great fit. But having trouble finding hub. Any ideas? Wondering if we can put CR hub on our bikes? I'm tempted to go with full rekluse manual clutch. But the price tag is little too high compared to all those CR clutches out there... Also how about slave cylinder o rings?
Another story is after I put new plates+steels in there it drags really bad :-/ But I'll dig little more in that and measure everything and hopefully will be able to figure it out. There's great info on stack/plates/steels here! Thanks!

One more thing - the steels I got in the kit are all smooth except of one that is 'textured' I've seen both but never mixed? Is there a reason for that? Does the textured one need to be 1st/last in the stack? Shouldn't matter, right?


Reply With Quote


  #2  
Old 04-05-2020, 02:47 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,063
Default

Yes measure up and skim back washer as per advice. I'd also run Motul Transoil Expert. If I run ordinary Transoil it drags. Expert it's good.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch springs crossover EC300 2011 Rampart Enduro Engine - 2 stroke 7 07-20-2019 10:33 AM
Clutch Friction Plates crossover EC300 2011 Rampart Enduro Engine - 2 stroke 5 04-21-2019 01:23 PM
clutch plates crossover savage sausage Enduro Engine - 2 stroke 1 04-24-2014 02:24 AM
GG 125 clutch crossover jayc Enduro Engine - 2 stroke 3 07-08-2009 11:51 AM
125xc clutch crossover? jayc Enduro Engine - 2 stroke 0 04-01-2009 12:23 PM




All times are GMT -5. The time now is 08:06 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org