|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2001 EC300 wheels
Hi all,
Just picked up a 2001 EC300 for myself (not my first dirtbike but is my first GasGas and my first 2 stroke!) Looking forward to both enduro riding and road hillclimb racing on it. My question for road hillclimb is getting supermoto wheels to fit. I can get a set of supermoto rims built for the bike from SMPro but would need a set of hubs off a 2001 model. Do later hubs and wheels fit the 2001 model or do i need to get specific year wheels etc for it? or alternatively does anyone know of any SM wheels that fit with little modification? Cheers Dan |
#2
|
||||
|
||||
Quote:
It would be helpful if you update your profile with your whereabouts, at least the country where you live. This question come up from time to time. You might find some answers using the search function, but I can give you a short answer: I think hubs from almost any year Gasgas can be used. The later (from 04 or thereabout) started using a bigger front axle, but it will be just a matter of getting suitable bearings and spacers to fit your fork. I use my 06 wheels on my 15 model, and a pair of Talons fits both bikes. There are Gasgas SM wheel sets available, e.g. from Motocrosscenter in Spain. https://www.motocrosscenter.com/shop...bs-196601.html
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
|||
|
|||
Quote:
Will trawl the forum a bit harder and probably end up with some SMPro supermoto rims for about ?600 from their shop |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2014 ec300 wheels on 2006 ec300 | zombiescustoms | Enduro Chassis & Body | 1 | 12-28-2015 07:44 PM |
SM wheels EC300 | stian | "Wanted to Buy" & "Want To Trade" | 0 | 06-08-2014 09:40 AM |
Gas Gas FSE400 Wheels into a 2001 gas gas ec300 will it work? | johns2394 | Enduro Chassis & Body | 2 | 03-22-2009 02:48 PM |
EC300 wheels | firckin | Enduro Chassis & Body | 1 | 06-27-2007 05:23 PM |