Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-02-2018, 05:15 AM
exman exman is offline
Member
 
Join Date: Nov 2018
Posts: 12
Default EC 300 2012 Rear Wheel Spacers

I'm in desperate need to renew bearing and seals on the rear wheel and replace badly worn spacers, but all I can find on Ebay are for 2018-2019. Does anybody know if they suits 2012 model?


Reply With Quote


  #2  
Old 12-02-2018, 06:20 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 170
Default

Download the parts manuals for both years and compare the part numbers.
Reply With Quote
  #3  
Old 12-02-2018, 11:57 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

So after last set were out I got some stainless sleeves turned up and pressed on the old turned down spacers
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #4  
Old 12-02-2018, 01:17 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default 2012 rear spacers

I have two rear spacers(alumn) . New take offs. I decided to go with steel instead . They share the same part # so be careful and ask if ordering.
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #5  
Old 12-02-2018, 02:04 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Get the spacer, bearing, and seal kits from SKF.

http://www.innteck-usa.com/products/...?ProductID=436

Reply With Quote
  #6  
Old 12-02-2018, 03:45 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 956
Default

Nice find Gerard!!! Please forgive me i thought the original poster was referring to the spacer between the bearings
__________________
'12 XC 200 TTX Sold
'15 XC 250E Sale pending
Reply With Quote
  #7  
Old 12-03-2018, 02:37 AM
RudolfHucker's Avatar
RudolfHucker RudolfHucker is offline
Senior Member
 
Join Date: Oct 2018
Location: Central UK
Posts: 170
Default

The SKF kits are outstanding. The seals have a rotating section that sits against the spacer so you don't get friction and wear of both parts. You can notice the friction reduction if you just push the bike along by hand.
Reply With Quote
  #8  
Old 12-15-2018, 07:59 AM
exman exman is offline
Member
 
Join Date: Nov 2018
Posts: 12
Default EC 300 2012 Rear Wheel Spacers

All I have to do is to choose among the solutions.Thanks a lot guys!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear wheel spacers dimensions needed mrfreezer Enduro Chassis & Body 10 10-27-2017 03:41 AM
wheel spacers kpuc11 Enduro Chassis & Body 9 10-16-2016 05:14 PM
ec 200 wheel spacers gump147 Enduro Chassis & Body 6 03-05-2015 10:35 AM
Rear wheel spacers! JCat Enduro Chassis & Body 3 12-21-2011 03:35 AM
Rear wheel spacers revisited. Ud_luz Enduro Chassis & Body 9 09-13-2010 08:01 PM




All times are GMT -5. The time now is 09:04 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org