triple clamps

[hallyfromspen]

hi all,first time on here,does anyone know what triple clamps are compatable with a 2009 gasgas 300 ec?there dont seem to be any after market ones available and im pretty sure they will be the same as another bike,thanks in advance

[roostafish]

My BRP triple clamps are from a YZ 250. They fit very tight on the steering stem. If I had it to do over again, I would have kept the stock clamps on and figured out a way to do an under bar mount on my own. Perhaps even the BRP under bar mount would work with the stock triple clamps.

I'm not sure, but I'm finding that stock is usually better than anything you can buy unless you are doing something very specific. For instance: Pivot pegs, ODI clamp on grips, etc.. Bling is a waste of time and money. One time I purchased a super trick set of triple clamps for my Husqvarna WR 125. They changed the way the bike felt, and not in a good way.

[hallyfromspen]

thanks,i had a rush of blood to the head,it was just a bling thing!!.will be leaving standard clamps on.

[thumperrider1]

In my opinion, the best money you can spend on a bike is on the suspension.

[hallyfromspen]

Very wise,fortunatly my bike is fully sorted suspention wise.just fitted the 2011 plastic kit and a one off graphics kit.talon carbon fiber hubbed wheels.just gone back to two stroke after 6 long years on fourstroke ktm.and the gas gas is awesome,considering the flex bars from mousse as i have perminant damage in left hand and wrist from mx crash,any experiance with these bars?

[Fred1956]

Originally Posted by hallyfromspen

.talon carbon fiber hubbed wheels.just gone back to two stroke after 6 long years on fourstroke ktm.and the gas gas is awesome,considering the flex bars from mousse as i have perminant damage in left hand and wrist from mx crash,any experiance with these bars?

Where do you get the 'carbon fiber hubbed wheels'? And this thread has info on the Flexx bars with comments by the manufacturer http://www.gasgasrider.org/forum/showthread.php?t=11406

[hallyfromspen]

they are available from Talon Uk,the hubs are alloy on bearing and spoke mounts with a carbon fibre centre,red anodised hubs with the carbon in centre.look really nice.More bling but very nice.