Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-29-2021, 12:50 PM
Brad Brad is offline
Member
 
Join Date: Jul 2018
Posts: 5
Question Rear Wheel Bearings Spacer - sprocket side - EC300 (2006)

Part No. BE250318056 superceded by BE555012509
Which way should it be installed - A or B ? (see attachments)
Attached Images
File Type: png rear-wheel-bearings-spacer.png (114.5 KB, 21 views)
File Type: jpg rear-wheel-bearings-spacer-fitment-c.jpg (13.0 KB, 20 views)


Reply With Quote


  #2  
Old 08-29-2021, 07:13 PM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

A

I also use the axle to keep the spacer aligned when installing the outer bearing.
Reply With Quote
  #3  
Old 09-01-2021, 05:38 AM
Brad Brad is offline
Member
 
Join Date: Jul 2018
Posts: 5
Default

Quote:
Originally Posted by gasgasman View Post
A

I also use the axle to keep the spacer aligned when installing the outer bearing.
I'm not convinced it is A for this spacer (BE555012509) which supercedes BE250318056. I've had a closer look and drawn it more to scale as per attachments. Seems to me like it B is the correct fitment?
Attached Images
File Type: jpg fitment 1s.jpg (118.7 KB, 38 views)
File Type: jpg fitment 2s.jpg (82.6 KB, 17 views)
Reply With Quote
  #4  
Old 09-01-2021, 06:45 AM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

http://www.gasgasrider.org/forum/showthread.php?t=2566

First post has pic of how it goes.
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #5  
Old 09-01-2021, 06:57 AM
Brad Brad is offline
Member
 
Join Date: Jul 2018
Posts: 5
Default

Quote:
Originally Posted by cbutler View Post
That post refers to the old spacer BE250318056 which has been superceded by this new one BE555012509. They are very different.
Reply With Quote
  #6  
Old 09-01-2021, 09:07 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 707
Default

They "look" different but the same purpose. It is the same put it in like gasgasman (the most knowledgeable person on this site) said or put it in like you want and do it again.
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #7  
Old 09-02-2021, 04:58 AM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

Have a close look at the spacer, it will have a step on it that ensures the torque of the axle nut only puts pressure on the bearing centre and not the seal/case area. A in the diagram above is correct.
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #8  
Old 09-02-2021, 07:04 AM
Brad Brad is offline
Member
 
Join Date: Jul 2018
Posts: 5
Default

http://www.gasgasrider.org/forum/member.php?u=2 gasgasman
http://www.gasgasrider.org/forum/member.php?u=1791 cbutler
Firstly to both you guys, sorry if you felt any disrespect was implied by me. It wasn't intended as I have huge respect for you and anyone who takes the time to contribute to this forum.
http://www.gasgasrider.org/forum/member.php?u=2703 Gasser Nate
I totally understand the "putting torque pressure on the wrong part of the bearing" thing which is why I asked the question.
I think I caused confusion because the drawings I put in the original post are not to scale, so sorry for that. I've now attached drawings of both A & B fitment which might help to resolve the question. To me B looks right, but would appreciate all your thoughts. Thanks.
Attached Images
File Type: jpg fitment As.jpg (64.9 KB, 11 views)
File Type: jpg fitment Bs.jpg (65.2 KB, 13 views)
Reply With Quote
  #9  
Old 09-02-2021, 10:49 PM
Gasser Nate's Avatar
Gasser Nate Gasser Nate is offline
Senior Member
 
Join Date: May 2010
Posts: 644
Default

This one is correct.
http://www.gasgasrider.org/forum/att...2&d=1630492679
__________________
Back on a gassy! 2018 EC300! 🤘
Txt 280 07 to make me feel like a gumby again
Reply With Quote
  #10  
Old 09-03-2021, 09:12 AM
Brad Brad is offline
Member
 
Join Date: Jul 2018
Posts: 5
Default

Quote:
Originally Posted by Gasser Nate View Post
Thanks Nate
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Rear Wheel Spacer, Sprocket Side, Old Style Zman "Wanted to Buy" & "Want To Trade" 4 10-06-2016 06:13 AM
cross over for rear wheel dust seal/ wheel spacer jason tati Enduro Other... 3 07-16-2016 03:40 AM
Installing drive-side rear wheel bearings jdosher Enduro Chassis & Body 11 12-18-2014 12:08 PM
'06 EC300 Rear wheel bearings Eugene Enduro Chassis & Body 3 01-29-2009 08:18 AM
2006 Rear Wheel Bearings (fiche is wrong) cdn280 Enduro Chassis & Body 0 06-08-2007 05:03 AM




All times are GMT -5. The time now is 04:29 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org