|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
04-01-2009, 05:44 AM
|
|||
|
|||
99 ec300 front wheel bearings and seals
I looked in the parts cross, it said 6004 2rs for the bearings, anyone know the size of the seals for the front wheel on a 99 300?
thanks 
|
|
#2
04-01-2009, 05:46 AM
|
|||
|
|||
|
front forks are conventional 45mm zokes also.
|
|
#3
04-01-2009, 01:31 PM
|
|||
|
|||
|
FYI
I went down that road buying individual bearings from a bearing shop thinking it would be cheaper, but even with the "cheaper" Chinese bearings it still was more expensive than if I'd just ordered the "kit" from GoFasters. They are very reasonably priced. Sorry I can't help with what bearings were used on bikes with conventional forks.
__________________
Ross '05 MC 250 '91 Husky 610wxe '04 Duc M800 R.I.P '06 Duc S2r 1000 R.I.P '07 Duc S2r 1000 still rubber side down... ---------------------------------------------------------- May be so... May be not so... My Website
|
|
#4
04-01-2009, 03:51 PM
|
||||
|
||||
|
The seal on the newer bikes is a 30x42x7. The seal on the older bikes will have a different ID(inside diameter) because the axel is a smaller diameter. The first # is the ID and you can measure your axel to get that. (?)x42x7 These measurements are in millimeters. - Ken
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rear wheel bearings on 03 | kendunn | Enduro Chassis & Body | 8 | 01-06-2011 05:43 PM |
| Wheel bearings? | roostafish | Enduro Chassis & Body | 1 | 05-25-2010 09:45 AM |
| replacement front wheel for ec300 | mk1jt | Enduro Chassis & Body | 3 | 02-17-2010 07:59 AM |
| '06 EC300 Rear wheel bearings | Eugene | Enduro Chassis & Body | 3 | 01-29-2009 08:18 AM |
| front wheel bearings | pizzaman | Enduro Other... | 4 | 10-31-2007 07:50 PM |
Linear Mode
