|
|
|||||||
| Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
 |
|
|
Thread Tools | Display Modes |
|
#1
07-24-2012, 04:02 PM
|
|||
|
|||
rear caliper carrier
my rear caliper carrer is worn.... ive fitted new pins but there is still loads of play, i cant find a GasGas carrier forsale unless i buy new but i do not have the funds for that so could i make one fit from another bike? say honda etc?
|
|
#2
07-24-2012, 07:12 PM
|
||||
|
||||
|
Quote:
__________________
All healed up, and ready to burn some fat.
|
|
#5
07-25-2012, 10:01 AM
|
||||
|
||||
|
If you buy anything buy an EE with integated sharkfin. Besides that, if funds are low, take it to a machine shop and have them bore the worn hole and press a bushing in. We did this to my brother's Husky carrier, worked great.
|
|
#6
07-25-2012, 04:56 PM
|
|||
|
|||
|
Send me a picture of what you have,, I may have one.. cruiser1911@me.com
__________________
Steve 16 Beta 350rr 04 KTM 525 sx/exc gone 03 KTM 625 sxc-rehab unit-did its job and now gone 03 GG 250 ec-gone 97 GG 250 ec Gone
|
|
#7
07-25-2012, 05:09 PM
|
||||
|
||||
|
carrier
Like this? Has part # BE250022120 on the casting, that # fits a 2001 per gofaster fiche but I don't know about the 2000, it has approximately 8.95mm pin hole It has a rub mark from the rotor?? on the inside edge but shouldn't be an issue. Where you located?
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro 
Last edited by Fred1956; 07-25-2012 at 05:11 PM. Reason: spelling
|
|
#8
07-25-2012, 05:25 PM
|
|||
|
|||
|
im in the UK (united kingdom) reason why ive never asked in the wanted section as 99% of this forum is in the USA, the carrier on a 2000 is also BE250022120 but ive just found one in a salvage yard but its off a 2004 450 FSE but according to the manuals they are the same part number
|
|
#9
07-25-2012, 07:19 PM
|
||||
|
||||
|
Good deal ! It'll have the # on the casting just check before you buy. Good Luck!
__________________
Fred Overstreet 2010 EC250 SixDays 2004 GasGas EC300 -Sold to a good home 2006 GasGas EC250-Sold to a good home 2006 GasGas TXT 280 Pro
|
|
#10
07-28-2013, 08:43 AM
|
|||
|
|||
|
Rear Caliper Carrier
Don't know if anyone reads these old threads but I have the same worn bore on my 2001 EC250 caliper carrier. Took it to the machine shop on Martha's Vineyard to be bored out and sleeved. Am hoping to get it back Monday to see how it works out. My brake pads were wearing out quickly from dragging due to the caliper not being able to float well.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 2008 EC Rear Caliper???? | eaze_50 | Enduro Chassis & Body | 2 | 01-12-2012 10:09 PM |
| 05 EC300 brake caliper carrier | jpelaston | Enduro Chassis & Body | 1 | 12-11-2011 01:15 PM |
| rear caliper replacement | wardy | Enduro Chassis & Body | 2 | 08-30-2010 08:07 PM |
| Rear Brake Caliper | blitz11 | Enduro Chassis & Body | 11 | 10-28-2008 04:38 PM |
Linear Mode
