'97 EC 250 will a Rekluse Clutch fit?

[Dkskioh]

I'm due for a new clutch and want to install a
Rekluse on my '97 EC250. The model years listed by Rekluse run from '00 to '11.
Anyone know if the clutch for the '00 will work on the '97?

[desertgasser300]

Originally Posted by Dkskioh

I'm due for a new clutch and want to install a
Rekluse on my '97 EC250. The model years listed by Rekluse run from '00 to '11.
Anyone know if the clutch for the '00 will work on the '97?

It will work in a 97', but you will need to make a spacer for the clutch cover. A side by side comparison of the OEM and Rekluse clutch cover will show that the 97' cover is deeper, but still not deep enough to fit. A spacer will only need to be a few mm's deep to allow the clutch to function properly. I have fit my Rekluse from my 12' into my 97', to find this out. I just didn't want to mess with making a spacer for it. I luckily found a Dyna ring auto clutch from a member on here that is local to me.

[Dkskioh]

Thanks! That's what I needed to know! Looks like I tackle the spacer issue!!!

[desertgasser300]

Originally Posted by Dkskioh

Thanks! That's what I needed to know! Looks like I tackle the spacer issue!!!

I would like to see the finished product?

Sent from my QMV7A using Tapatalk