|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Front Brake Hose Crossover
I searched, but couldn't define what the exact crossover for an 07 front brake hose is. So was hoping someone here knows for sure.
I borrowed one from my KTM, and it fits, but the bottom fitting it straight not angled, so it routes the wrong side of the bleed nipple. I also compared with an 05 YZ250, and that wouldn't fit as the top fitting is straight, not angled as the hose fits on the opposite side of the master to the Nissin master on the Gasgas. Also, does anyone have an opinion on the quality of Moose braided brake lines? As that is what I will be using, or possibly a Braking hose kit. Cheers Last edited by noobi; 12-10-2012 at 02:10 AM. |
#2
|
|||
|
|||
Did you price a gasgas one? I put a new line on mine last summer and the OE line was only 100 bucks from the gasgas dealer, which was about the same as getting a custom one but was less of a pita.
|
#3
|
||||
|
||||
You got anyone you can compare a honda one with Noobs? CRF450R
|
#4
|
|||
|
|||
On my '03, which has Nissin components, I used a '99 CR250R front brake hose. The Galfer hose came with new banjo bolts and washers and fitment was fine, but the CR hose is about 1" longer.
__________________
'15 YAMAHA WR250F, '75 YAMAHA TY80 Gone: '00 380 EXC, '03 EC300, '07 YZ250, '07 250 XC-W, '08 YZ450F, '12 CRF250R |
#5
|
||||
|
||||
Noobi, I bought one from Hel brakes UK cheaper than anything in NZ and that included shipping.
http://www.brake-lines.co.uk/index.p...roduct_id=8666 Make sure they send you the correct pitch banjo bolts, if you go with them. |
#6
|
||||
|
||||
Quote:
Also, the price is less than $100 retail for a brake line, I don't see the small saving being worth it. I think they sell to the public too, if anyone in NZ is interested in braided lines. |
#7
|
||||
|
||||
I'm not sure about other years but a caliper on a 06-Yamaha YZF-250 is the same as the 11 gas gas. The carrier is the only difference. I'm not sure how it bolts to the master cylinder but with hooking up my brakes to the Yamaha SSS forks the brake line fits perfect at the caliper.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front brake Assy crossover | gtsnowcrack | Enduro Chassis & Body | 1 | 07-24-2012 09:32 AM |
Brake hose routing | GasGas | General Discussions & Announcements | 0 | 08-28-2011 02:22 PM |
front brake crossover | kai69 | Enduro Other... | 5 | 09-04-2010 04:47 PM |
Front brake hose guide | steve | Enduro Chassis & Body | 0 | 03-20-2008 05:27 PM |