|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Crankshaft play - how much is too much ?
As the title says, how much ?
https://www.youtube.com/watch?v=hHMONJp6qhA p.s. sorry for the shaky hands, but it really moves around
__________________
'14 EC300 |
#2
|
|||
|
|||
The side to side play is not your main concern. You want to check the up/down play. I don't know what the acceptable up/down tolerance is though.
Sent from my iPhone using Tapatalk |
#3
|
||||
|
||||
Any noticeable radial play isn't good
Side play is ok at 1 or 2mm range
__________________
www.endurohp.eng.br Sherco ST300 2015 (Trials) https://www.instagram.com/leocm74/ Brasil! |
#4
|
||||
|
||||
Quote:
Sent fra min GT-I9295 via Tapatalk
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#5
|
||||
|
||||
Up and down is non existent. Side to side is what i was worrying about, but if you guys say up to 2mm is fine, then i'll just leave it as is.
__________________
'14 EC300 |
#6
|
||||
|
||||
side to side per service manual, with a feeler gauge in the connecting rod standard 0.8mm, limit 1mm
Up/down, doubt you can feel it installed... Judging by the video it is ok....
__________________
EC250 2019 |
#7
|
||||
|
||||
Thanks guys for the quick replies and info.
__________________
'14 EC300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WTB crankshaft for 06-08 ec450fsr | fastisbetter | Parts | 2 | 09-29-2013 08:26 AM |
crankshaft cross-over | whodat | Enduro Engine - 2 stroke | 2 | 04-26-2010 06:05 AM |
crankshaft dimension | tontonroger | Enduro Engine - 2 stroke | 1 | 04-18-2008 10:18 AM |