|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Nissin rear caliper retaining clip position
Hey all,
The retaining clip fell out before I could see how it should be positioned. I have an 05 DE250. Can anyone help? I've been searching but can't find anything, and the parts diagrams in the manual are no help. Looks like my front one might not be installed correctly either. I looked at it for reference, but it looks like the clip is hanging out of the caliper. Thanks! |
#2
|
||||
|
||||
Rear...
Front..... |
#3
|
|||
|
|||
Puuurfect! Thanks GGman - you're too good to me.
One other question ... looked like from the fiche that there is a clip at the front of the caliper too (front of the rear). Is that correct, or was I seeing things. If there is, I am missing that clip and either did not reinstall it when I put new pads in ages ago, or it was missing before that, or ... it broke off?? Cheers, Three-HUNN-URD |
#4
|
||||
|
||||
The clips are there to keep the pads from rattling.
The clip for the front caliper might have been left off. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Nissin Rear brake pump | Klausen | Enduro Chassis & Body | 14 | 08-25-2014 09:14 AM |
Rear brake position | Lildawg | Enduro Chassis & Body | 18 | 06-15-2011 11:17 PM |
Nissin Rear Brake rebuild kit? | Berkyboy | General Discussions & Announcements | 4 | 09-13-2007 06:41 AM |
Clip position ? | thingymijig | Enduro Intake/Carburetion - 2 stroke | 3 | 03-01-2007 04:57 AM |