|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
|
#1
|
||||
|
||||
07 Oz Ec300...Does it have an alloy impeller ?
Hey Guys,
I live in Australia and have just bought an 07 Ec 300. I have read about a few probs with the plastic impellers and was wondering if anyone has the same bike and whether they know if we already have an alloy impeller from factory?? I will check myself if I dont get replies but thought I'd try the forum out first. Also , any cheap go fast mods??? Thanks Mark. |
#2
|
|||
|
|||
not going to help you but ...
I took off the water pump cover on my 06 to put on an alloy impeller and the one on there sure looked like an alloy one to me. never got around to asking about it ... anyone know if the 06's had an alloy impeller. |
#3
|
||||
|
||||
my 07 ec 300 impeller is on the bench right now. I pulled it out to take a look and after 60 hr on the bike the plastic impeller looks just like new.
__________________
07 GG EC 300 05 KTM 250 exc 99 KTM 640 enduro |
#4
|
||||
|
||||
Cheers guys, I guess mine will be plastic too then.
Thanks for the replies |
#5
|
|||
|
|||
It sure does, mine was cracked big time and the shaft was spinning.
Replaced it with a gasgas original part which was alloy, guess they much have upodated the part It came with a extra washer to go behind the impeller
__________________
2007 Gas Gas EC300 2005 CRF450X 2006 WR290F Wandas Bike 2007 CRF280X Rebeccas Bike |
#6
|
||||
|
||||
Yep, second hand.
It also feels a lot less snappy than the Rmx I sold to buy it but I have been told that the 300s are not as snappy but a lot more torquey.I will still check hv coil connection when I get time to see if it is not connected right. Also the bloke with the cracked impeller, sorry am writing now and forgot your name, you are saying that mine is plastic, yeh? Thanks guys |
#7
|
|||
|
|||
I take it your bike was bought second hand?
__________________
--------------------------- GG EC300 2007. |
#8
|
|||
|
|||
no brand new, I had the cover off at about 80 hours It did not look any different than the ltr one. Although if gmp says the ltr has more vane than stock I'd believe it. But the stocker is still in there. |
#9
|
||||
|
||||
Well since I had my impeller off anyhow I thought I would just replace it. I called up LTR and Les said he didn't have any in stock and was not going to make any more. So I called up GoFasters and all they had was the plastic impellers.
Anybody know of a dealer with a alloy one in stock?
__________________
07 GG EC 300 05 KTM 250 exc 99 KTM 640 enduro |
#10
|
|||
|
|||
My '06 had the composite impeller. It was nearly eroded away to nothing at 91 hours.
__________________
Eric K '06 GasGas EC300 '01 GasGas XC300 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Alloy Ultima foot brake lever | Klausen | Enduro Product Reviews | 8 | 02-09-2011 02:21 PM |
LTR alloy water pump impeller. | slocalspode | Enduro Engine - 2 stroke | 30 | 04-26-2009 07:59 AM |
Bike running hot - check impeller? | stay_upright | Enduro Engine - 2 stroke | 8 | 07-10-2008 07:49 AM |
'07 Plastic Impeller | GMP | Enduro Engine - 2 stroke | 0 | 05-14-2007 07:58 AM |