Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #31  
Old 12-29-2019, 12:10 PM
SteveB28 SteveB28 is offline
Member
 
Join Date: Jan 2019
Posts: 1
Default

I am so thankful for this thread!

I?ve had an overflow issue for the last few weeks, which has become worse and also made the bike difficult to start. I?ve had the carb off several times in the last few days with no success, until I read and understood the information here.

Not sure if this is any help, but Ive place a 6mm and an 8 mm block across the mating face and scribed two lines on the metering block, which I?ve used to set the float height.

Thanks again to everyone who has contributed, I am most grateful.


Reply With Quote


Reply

Tags
hour



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set float level. Revisited. gasgasman Enduro Intake/Carburetion - 2 stroke 48 11-10-2018 05:11 AM
Keihin PWK 2009 float level 300ec Enduro Intake/Carburetion - 2 stroke 5 12-23-2011 04:22 AM
2011 ASII 36 Jetting - what were they thinking? Neil E. Enduro Intake/Carburetion - 2 stroke 39 06-26-2011 09:01 PM
Float Level, please explain? rod Enduro Intake/Carburetion - 2 stroke 13 02-12-2011 01:03 PM
WP Fork Oil Level MattR Enduro Suspension 11 08-02-2006 10:40 AM




All times are GMT -5. The time now is 04:38 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org