GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion

Thread Tools Display Modes
Old 02-06-2018, 03:08 PM
carloxgsxr750 carloxgsxr750 is offline
Join Date: Feb 2018
Posts: 1
Default FSE 450 Map 05/06/07

Good I present myself from Madrid FSE 450/06.
Greetings to all ... Apologies for my English.
I have a problem with my 2006 FSE has a switchboard with map 05 and it works fine.
I put the map of (2005 values 2006) and (2005 values 2007) and accelerates up from 1900 rpm to 6500 and then remains accelerated at 3100 rpm and takes about 10 seconds to return to normal idle 1900 rpm.
It does so in the two maps, A and B, and with maps 2006 and 2007.
The TPS is new, is set to its value +290 and reset.
The CO is at +17.
He keeps doing it.
I can only put your map of 2005 and this does not, go up and down well of laps and adjust the idle ok.
Any ideas?
I upload the maps to share them.!wrRUhBjY!fkRCBzvJU...V7egxzl3b4BAVE

Greeting and thank you very much.

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 08:55 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2009 -