Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-24-2011, 02:49 PM
noobi's Avatar
noobi noobi is offline
Senior Member
 
Join Date: Sep 2008
Location: New Zealand
Posts: 1,031
Default Is 202psi normal?

Did a compression test on my 07 200, its done about 100 hours in total, and 80 on the top end (dont ask about that)
I was wondering if +200 psi is ok? Iv done the test about 8 times now, and every time its the same, and im using a good guage, which measures dads KTM as ~168psi and my 125 as ~178psi. Im not doing a wet compression test, where oil is put down the plug hole.
It just seems like a ridiculously high compression?

Thanks
Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Jetting Q: outside of the normal range. slocalspode Enduro Intake/Carburetion - 2 stroke 8 05-17-2010 09:08 PM
Normal 08' 250? nick790 Enduro Intake/Carburetion - 2 stroke 6 03-25-2009 04:02 PM




All times are GMT -5. The time now is 05:59 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org