Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-08-2014, 01:43 AM
VINTAGE RACEWEAR VINTAGE RACEWEAR is offline
Member
 
Join Date: Oct 2014
Posts: 22
Default Newbie needing UK dealer support/2011 conversion kit.

Well I am hooked, recentley purchased a 2005 ec300 over a 2012 ktm 300 (what a disaster that would have been) and saved ?1500 for a bike I think is twice as good for the money. Rode it for the first time yesterday and had a great time. I am 54 and 100kg and would class myself as a mid pack plodder.I havnt done enduro before and didnt want to part with too much money if I didnt enjoy it.I spent ?1500 on a bike which I think is going to do everything I need and more, it turns, starts easily, has tons of low down power plus gets a fair old clip on if needed. Well now I know ive made the right move I want to freshen her up a bit and have seen the 2011 upgrade kit people do. I am in the uk and was wondering about dealer support/parts supply. Can someone tell me the best place to get the kit. thanks mark in leicester.


Reply With Quote


  #2  
Old 12-08-2014, 02:29 AM
Todd5774's Avatar
Todd5774 Todd5774 is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Hampshire, UK
Posts: 478
Default

http://www.motocrosscenter.com/ecomm...th=667_668_520

Everything you need can be found on here, best place to get it all from.

Do a search here on the forum there are lots of threads on what you need and how to do it.
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic.
Now a 250cc.
Reply With Quote
  #3  
Old 12-08-2014, 02:59 AM
Caravan Monster's Avatar
Caravan Monster Caravan Monster is offline
Senior Member
 
Join Date: Jun 2010
Location: Northamptonshire, England
Posts: 315
Default

Biketech and Steve Plain have a lot of experience with the EC over the years and normally have things in stock.

Although the recent plastics look a lot better, those I've seen close up did seem to be a lot less substantial than the older ones and some of the newer seats less comfortable.
__________________
'00 Montesa Cota 315R
'13 Husaberg TE 300
Reply With Quote
  #4  
Old 12-08-2014, 03:36 AM
VINTAGE RACEWEAR VINTAGE RACEWEAR is offline
Member
 
Join Date: Oct 2014
Posts: 22
Default

thanks for that, i have seen the threads and was hoping to buy the kit in the uk if possible. thanks
Reply With Quote
  #5  
Old 12-08-2014, 06:46 AM
WAZ WAZ is offline
Member
 
Join Date: Feb 2014
Location: Warwickshire, England.
Posts: 95
Default

I get most of my spares from here- http://www.gasgasuk.com/ . I've used The motocross center before and found them easy to deal with, and cheaper than UK dealers.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Phil's 2002-2011 Conversion pscook Enduro Chassis & Body 3 06-29-2013 12:44 AM
2002 XC125 to 2011 Conversion lklive Enduro Chassis & Body 1 04-17-2013 07:43 AM
01-06 Conversion to a 2011 djroggen Enduro Chassis & Body 23 01-29-2013 10:57 PM
2011 GG - fork & triple clamp conversion BrentMartell Enduro Suspension 9 03-16-2011 09:58 AM
2005 to 2011 estart conversion forgiven Enduro Chassis & Body 1 01-17-2011 07:34 PM




All times are GMT -5. The time now is 01:40 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org