GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.

Thread Tools Display Modes
Old 01-07-2009, 06:49 PM
GasGas.ec300.Andy GasGas.ec300.Andy is offline
Join Date: Jan 2009
Posts: 8
Default How to setup the carb mix on a 2001 ec300

Anyone have any diagrams or pictures on setting up a carb ie how many turns in and out.
Reply With Quote
Old 01-07-2009, 07:54 PM
ramcclure200's Avatar
ramcclure200 ramcclure200 is offline
Senior Member
Join Date: Apr 2007
Location: Pensacola, Florida
Posts: 196

Check out this link for info on tuning carb, its a scooter site but the information should be universal.

Maybe some of you tuners can check it out and see if its good info or not.
I just got in some pilot jets from Mark at Go Fasters and was going to try and tune according to info I found and see if it works.

The weather is going from low 70's to 60's but it should get a little colder before winter is past so i'm going to concentrate on getting my jetting right and making notes for future use.

Here is another link that should have some more info that will be helpful.

also check here

Good Luck

ECDE200 2004
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
08 EC300 setup MX & Enduro AdrenalineJunky Enduro Suspension 4 06-03-2010 10:41 AM
Carb model on 04 ec300? socalscott Enduro Engine - 2 stroke 4 01-12-2010 07:40 AM
The best light setup for an 07 Ec300??? wence Enduro Electrical & Wiring 9 03-25-2009 09:42 AM

All times are GMT -5. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 -