|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
EC 250 2008 jetting problem
Hi guys.. I need some help... I try to tune the jetting.. I Have slide #7
Pilot Jet #45 Main Jet #175 Needle N1EG on the leanest position when I try to set idle I need to have Idle screw totally in and air screw just half a turn from fully closed. If I turn airscrew even 1/4 turn out idle starts to stick so it looks like it is lean. But on the other hand I have oil coming out from exhaust and my powervalve stick closed after riding a while in low RPM. I need to pull WOT to clean it and than it runs good, but lastly I tried to clean it with WOT and it fouled the plug and I needed to change it. Old plug has black electrode but the rest of plug looks totally clean. Can you help me with this? I have already received NEDW needle I ordered so I will try it today |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help.. Jetting problem? | Stefan Baele | Enduro Intake/Carburetion - 2 stroke | 7 | 08-26-2016 01:52 PM |
Jetting problem - JD / spooge / spluttering | jocser | Enduro Intake/Carburetion - 2 stroke | 39 | 05-16-2016 03:46 PM |
2008 EC300 jetting | jan_b | Enduro Intake/Carburetion - 2 stroke | 2 | 05-12-2014 06:04 PM |
2002 ec250sm jetting problem | chrisboy | Enduro Intake/Carburetion - 2 stroke | 9 | 05-10-2013 12:43 PM |
jetting problem/quiery... | lonetree | Enduro Intake/Carburetion - 2 stroke | 27 | 08-11-2012 07:20 PM |