|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Shock oil Wt and rebound adjustment?
What is the correct rear shock oil wt? I have a 2005 ec250 with the Ohlins shock. I've looked in the service manual but it only gives the oil wt for the front forks. Also, should the rebound adjuster have clicks? Mine rotates but does not click into positions like the low speed compression adjust or does.
Sent from my iPhone using Tapatalk |
#2
|
||||
|
||||
Ohlins 1304
Viscosity 11cST@40C http://www.peterverdone.com/wiki/ind...spension_Fluid Take your pick from what's available, using the table in the link above. I'd go with a synthetic fluid between 11 and 16cSt@40, and a viscosity index of at least 200 (low VI will tend to fade when used hard and temps increase). You'll notice some brands may be 2.5wt, others 5wt.. some may be labelled shock fluid, some suspension, and some tuners will even use fork fluids if the specs are up to it. IE motorex racing fork oil 2.5wt (15.1cSt@40C VI 200). In regards to the rebound adjuster wheel, it won't click until the shock is assembled and pressurised. You need to ensure the adjuster is OPEN before you discharge, or if not you may need to physically push the rebound needle down inside the shock shaft to allow fluid to pass during the bleed process. |
#3
|
|||
|
|||
Thank you.
Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
On-the-fly rebound adjustment too? Sachs fork | _Hammy | Enduro Suspension | 2 | 11-08-2013 03:55 AM |
Shock rebound grind | swazi_matt | Enduro Suspension | 4 | 03-23-2012 07:20 AM |
Can't find the rebound adjustment on my Ohlins Shock? | Krieg | Enduro Suspension | 4 | 01-04-2011 07:15 AM |
sachs shock rebound prob | wence | Enduro Suspension | 30 | 05-10-2010 12:10 PM |
Rebound adjustment on 04 & 05 MC and EC | FFRDave | Enduro Suspension | 4 | 01-23-2008 10:25 AM |