|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Which year exhaust is best?
I'm looking to get a new front pipe for my gasser, can anyone tell me which one is the best?
If you look at this link; http://www.motocrosscenter.com/ecomm...oducts_id=3134 it says you can fit it to the earlier models with a bracket, Inox steel is a very low corrosion and hard steel, but how well does the pipe itself perform? http://www.motocrosscenter.com/ecomm...oducts_id=6427 ^^^^ What is the pipe coming off the exhaust? http://www.motocrosscenter.com/ecomm...th=667_674_841 The above link lists all the ehausts available. I'm after good all round power, my current pipe performs well but has a dent, and I'd rather have a spare to play with before I try removing it, that and the EURO is weak as hell atm, worth investing...
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#2
|
|||
|
|||
Couldn't wait I'm afraid. The weak euro has given me the stainless exhaust, silent block and a free T-shirt for 160gbp. Nice! Buying a DEP nickel plated, made in UK is 210gbp plus postage
Has anyone fitted a later model exhaust to a newer bike? I hope they're not lying!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 Last edited by motopsycho87; 07-17-2015 at 06:08 AM. |
#3
|
|||
|
|||
Quote:
|
#4
|
|||
|
|||
The shape of the pipe hasn't changed. It's the mounting tabs that move. You may have to make some small little brackets but it should work
Sent from my iPhone using Tapatalk |
#5
|
|||
|
|||
Awesome, the website says I just need the bracket so I ordered that.
Wondering if perhaps I should temper the pipe back in the ovens at work. Guessing they aren't stress relieved after welding?
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#6
|
|||
|
|||
Yep. Even the part #s are the same per Gas Gas for the stock FMF but the pipes are slightly different. Had to do some easy tab fab for my '11 pipe to fit on my '08. ....which I promptly dented the hell out of.
__________________
-Keith '08 EC250 and some other bikes. |
#7
|
||||
|
||||
Quote:
Post 2, 9:02 PM 17th July Well you held out 1&1/2 hrs. (minus shopping time) That's a good effort in anyone's eyes.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#8
|
|||
|
|||
Quote:
LMAO!! Yes indeed good effort! Sent from my iPad using Tapatalk |
#9
|
|||
|
|||
The euro is getting weaker... I could have saved another fiver if I'd have waited :'(
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear 2016 RM-Z450 |
#10
|
||||
|
||||
Patience young grasshopper
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
First race of the year in the bag!! | spooly | Pictures & Videos | 6 | 01-28-2015 02:20 PM |
High pitch Squealing from exhaust and exhaust flange????? | Scar13 | Enduro Engine - 2 stroke | 5 | 02-11-2012 11:32 AM |
Year By Year Comparison for 300 ?? | GasGasDreamer | General Discussions & Announcements | 21 | 05-31-2011 10:53 PM |
Need help on engine case changes from year to year | CDBiker220 | General Discussions & Announcements | 1 | 05-26-2011 03:52 PM |
450 FSE / FSR year changes | iancp5 | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 02-23-2009 12:26 PM |