Sachs shim 7ID & 9ID, where I can buy?

[dewenduro]

I'd like revalve my 48 sachs fork.

Can anyone tell me where I can buy 7mm & 9mm ID valving shims?
(small piece(44), shipping to Europe/Hungary)

SDI(suspensiondirect),Racingsuspensionproducts: only 9ID
MXTech,RaceTech: I can't see

Thanks

[swazi_matt]

A while back I saw you could get them from the Beta site, the alternative is to grind out a smaller size with a dremmel

[husley]

Are these the 10' red Sachs Forks and are you in the U.S. ?

[dewenduro]

No.
It's a 2009 sachs fork (not racing version) See pictures.
I'm in Europe. (Hungary)

https://goo.gl/photos/97AFLkumSXBd1ywr6

[dewenduro]

Originally Posted by swazi_matt

A while back I saw you could get them from the Beta site, the alternative is to grind out a smaller size with a dremmel

Thanks! Wich Beta site?

Dremmel is not a good idea. See this post:
http://www.gasgasrider.org/forum/sho...hlight=dremmel

[swazi_matt]

Originally Posted by dewenduro

Thanks! Wich Beta site?

Dremmel is not a good idea. See this post:
http://www.gasgasrider.org/forum/sho...hlight=dremmel

i saw it on the beta usa site, but cant see them any more. did a bit more research ad it appears that they no longer list them, possibly i believe because the newer sachs forks on the betas are more similar to WP forks now

[twowheels]

The Sachs forks on the Betas continue to use 7mm ID shims.

Beta does not stock the 7mm shims, but we have built some for our own use. The plan had been to have them for large term sale but the process is such that it hasn't made sense to do so.

[Anders]

Originally Posted by dewenduro

Can anyone tell me where I can buy 7mm & 9mm ID valving shims?
(small piece(44), shipping to Europe/Hungary)

Thanks

You could ask your "local" RG3 suspension shop. I know the one in Sweden works on Sachs and surely have these shims available. However, I don't know if they are willing to sell you just the shims.

You could also contact Michigan Engineering as they offer 7mm id shims on their website. I have just googled it, I have never been in contact with them.
http://www.mei-inc.com/machine/shim/id_7_mm.htm

Sent fra min GT-I9295 via Tapatalk

[dewenduro]

Thank you Guys!

[twowheels]

Originally Posted by Anders

You could also contact Michigan Engineering as they offer 7mm id shims on their website. I have just googled it, I have never been in contact with them.
http://www.mei-inc.com/machine/shim/id_7_mm.htm

Sent fra min GT-I9295 via Tapatalk

Michigan Engineering will make you 7mm ID shims if you commit to a minimum order of 1000 pieces ... of any particular size