|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WP43 s
I recenlty bought and old gasser 2003 with WP43. Rode like nothing ive ridden before, so smooth plush compliant, so good and i ve owned heaps of bikes KTMs, husabers husquvarnas ect. Bike was a bit tatty and a nice 2006 popped up real cheap so i grabbed it. Swapped over the best bits and sold the old one.
Suspension on the 2006 is CRAP, so dissapointed. front and rear deflect like crazy, harsh just rubbish. Its still and old bike so i dont want to get involved in spending heaps on revalving ect. I did rebuild them as seals were leaking and i put 5wt oil and i read they are supposed to have 7.5wt so that could contribute butttt Does anyone have a nice compliant shim stack setting for the front and rear i can just copy? also any info on the lip machining in the marzoccis ive read about any help would be so appreciated, never should have sold the old bike doh |
#2
|
||||
|
||||
I have a complete set of WP43 forks complete with triple clamps from my 02ec300.
All parts are in A1 condition. I am in Rotorua NZ if you are interested? |
#3
|
|||
|
|||
Thanks for the offer, i will just try a self revalve first and see how it goes but i will definatley considder it
|
#4
|
|||
|
|||
ok here is my current compression valving
starting nearest the compression adjuster screw 13 x .2 14 x .3 15 x .15 16 x .2 11 x .1 17 x .1 19 x .1 11 x .1 11 x .2 22 x .1 11 x .2 Piston 22 x .3 any suggestions pleaaaassse Last edited by kiwigasgas; 08-22-2016 at 02:41 PM. Reason: wroing info |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Making WP43's the best they can be... will they be any good? | TheLetterJ | Enduro Suspension | 2 | 11-20-2014 02:32 PM |
WP43's HELP, can't get the Compression holder out! | iamyvr | Enduro Suspension | 4 | 01-28-2013 08:34 AM |
How can you tell when it is time to replace your WP43 fork Bushings | Zman | Enduro Suspension | 4 | 01-15-2013 09:16 AM |