Hard to put oil in your GG?

[Leo]

All you need is one thing like this, a piece of garden hose and one funnel.



it is better to change the diameter to the spigot from 10mm to 1/2"

[GMP]

Leo,

Thanks for sharing, all good stuff.

Awhile back, here in the US, someone made a one piece alloy fullel that threaded into the filler hole. I think an adapter that threads in and onto the neck of a liter of oil would be cool.

[Viv]

I just roll up a piece of ordinary A4 printer paper in to a cone. Tape the cone if you want but a sheet will work for one oil change. Very simple and easy with rarely any spillage.

ATF containers usually come with the right sized filler for the hole and are even simpler.

Viv

[skid jackson]

a little yellow coleman camp stove gas funnel works the balls to!!
http://www.ebay.com/itm/Coleman-Lant...#ht_941wt_1179

[andykr87]

I just use a paper cone throwaway water cup that you get off a water jug at work and snip the end of it off then throw it away when im done. easy clean up. helps to disconnect the gas line off the carb too.

[Dave]

I use one of these with a piece of smaller diameter tubing on the end.
http://www.amazon.com/Hopkins-FloToo.../dp/B000EH4V0Y
The on/off feature is pretty handy. Fill the graduated funnel, hang it off the bars with a small bungee cord, open valve and walk away.

[Diggs345]

I use a 1ltr gear oil bottle as it has a nice pull out spout that fits nicely into the gas gas filler , just fill it up with engine oil or at fluid and away you go

[Danj56]

Originally Posted by Dave

I use one of these with a piece of smaller diameter tubing on the end.
http://www.amazon.com/Hopkins-FloToo.../dp/B000EH4V0Y
The on/off feature is pretty handy. Fill the graduated funnel, hang it off the bars with a small bungee cord, open valve and walk away.

I use the same thing. I've had it since I owned my 2001. I rest it between my bark buster and handle bar, fill it up and go have a beer while it does it's thing.