|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
LTR or JD Jetting Kit
Hi,
I don't know if the was already discussed. Can somebody tell me the difference between the JD Kit and the LTR Kit? Thank you Elvis74 |
#2
|
|||
|
|||
Since nobody has chimed in I will give it a shot. I hope I won't totally mess this up, if so someone please correct me....
I think the kits are pretty much the same. Difference was if you ordered from Les he would throw in the needle he thought would compliment your riding style and altitude. I think he marked the kits -1, 0, and 1 to identify the needle he supplied but I'm not totally sure. They were aftermarket needles, probably the same that JD uses but he would polish off the ID marks (CCK, CEK, etc). LTR doesn't supply these kits any more although there may still be some available through GoFasters and other dealers. Another thing Les was good at was customizing the jets he supplied for your riding style and bike. My '00 XC250 uses jetting larger than most anyone else here on this board, even 300 owners. 48 pilot and 180 main. He knew that. I would never have gone that high with the pilot by experimenting as it acted like I needed to go down from the 38 pilot it came with. A few here have used the JD kit and I don't remember hearing anything negative.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
#3
|
||||
|
||||
The JD jetting kit is great! I highly recommend it.
|
#4
|
||||
|
||||
Yeah, from everything I've read the LTR needles are off the shelf CEK, CCK etc just as jostby mentioned. The JD needles are custom and usually triple taper which tend to have more hit than the straight taper CCK, CEK type needles.
__________________
07 EC 300 (under 500 miles, selling soon) 97 KTM 250 EXC (sold) 2016 Trek Remedy 29er |
#5
|
|||
|
|||
OK Guy's,
thanks for relpys. I think I will try the JD Kit. |
#6
|
|||
|
|||
Where would one find the JD kit?
|
#7
|
|||
|
|||
you will find it here:
http://www.jdjetting.com/xcart/produ...&cat=15&page=1 |
#8
|
|||
|
|||
I just noticed something here http://www.keihin-us.com/tune4.htm
Looks like Keihin makes a triple tapered needle that I bet would be is much cheaper. For the CCK looks like an N85E is the crossover. Well, I thought it interesting anyways, bet thats what JD uses.
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons). |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
where to go from here. jetting q. | dank | Enduro Intake/Carburetion - 2 stroke | 105 | 04-11-2011 04:25 PM |
04 ec 300 Jetting | lordfeyr | Enduro Intake/Carburetion - 2 stroke | 12 | 01-26-2010 03:16 AM |
Need help jetting an 06 EC 250 | piperpilot12w | Enduro Intake/Carburetion - 2 stroke | 3 | 11-16-2008 11:19 PM |
jetting help for 05 300 please... | mackmack | Enduro Intake/Carburetion - 2 stroke | 5 | 09-03-2007 05:10 PM |
06 300 jetting | fury1 | Enduro Intake/Carburetion - 2 stroke | 1 | 07-31-2007 06:37 AM |