|
#1
|
|||
|
|||
2012 GasGas EC200R Rebuild
Hey guys,
This is my first post on here and my first GasGas as well. I have ridden four strokes (husqvarnas, hondas, yamahas) for a number of years now and since moving out to Ohio after graduating from engineering school, I wanted to get a great enduro focused bike. So came the EC200R, bought it locally and it really needed some TLC. Throughout the last month or two with the help from the guys down at Lancaster Sport Cycles and some help from Rod Overstreet as well, I have converted this bike over from the plastic subframe to the new aluminum one (what a hassle that was...). In total, I did all of the following: -Aluminum subframe conversion -New 2014 seat -Front wheel bearings -New front axle -Fork rebuild -Steering stem bearing lube -New Pro Taper bars and grips -Engine Map switch relocation to the handlebars -Acerbis handguards -clutch/brakes bleed -piston inspection -replaced all engine gaskets -new radiators and braces -new radiator hoses -trans oil -new sprockets front and rear as well as chain -swing arm pivot bolt lube -carb rebuild -all new body plastics and I'm sure there are more... Regardless, I have put a lot of work into it and have had a heck of a time finding parts for it. Finally got it out this last weekend to break it in and I have to say, I absolutely love it. These are fantastic bikes!! Now for the pictures: -Sam The Finished Product The Beginning |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
|
#4
|
|||
|
|||
|
#5
|
||||
|
||||
Nice job.you just had to get it dirty the minute you finished huh?haha enjoy
__________________
2013 ec200r |
#6
|
||||
|
||||
If they gave out awards for a job well done you would get first place Nice Job Sam have fun with it !
__________________
IF I HAD ALL THE MONEY I SPENT ON DIRT BIKES , I WOULD SPEND IT ON DIRT BIKES |
#7
|
|||
|
|||
Nice job
__________________
Matt 1999 GG EC 250 Six Days 1999 Cagiva Gran Canyon 2001 Aprilia Falco 2001 Triumph Speed Triple for my 20 year old 2000 GG XC250 for my 20 year old 2003 Honda Rancher 350 for the wife |
#8
|
||||
|
||||
Very nice. I bought a '01 XC200 and had to do pretty much the same to it.
Very worthwhile project though. Thanks for taking the time to post. RB |
#9
|
|||
|
|||
Nice rebuild! I've always wanted to ride a GG200!
__________________
2005 GG EC250 - Smart Carb, Rekluse Core EXP3.0, KYBSSS Forks, LHRB 2011 GG EC300 2008 KTM 300 XCW - Rekluse, LHRB |
#10
|
||||
|
||||
Good on you man, way to tackle a project like that! I'm envious of the bike lift, been wanting one of those for many many years now (as well as a shop to store it in...lol).
She's a great looking ride, and perfect to see her all dirty after a good day in the woods. Nice Beemer too, always good to see a couple different versions of 2-wheeled fun in the garage |
Tags |
2012, aluminum, ec200r, rebuild, subframe |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GasGas 450fse 2004 engine rebuild-taiwan parts | krolik_21 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 01-31-2023 02:21 AM |
2012 Magura Clutch Rebuild | GLantern | Enduro Engine - 2 stroke | 5 | 02-26-2017 10:09 PM |
GasGas Engine Rebuild Step by Step with Photos | Moto7man | Enduro Engine - 2 stroke | 0 | 03-17-2014 03:33 PM |
2012 - ec200r | StuJohnson | New Bikes | 0 | 06-27-2013 03:37 PM |
EC200R vs EC250R (2012 model) | Jakobi | General Discussions & Announcements | 30 | 02-11-2013 03:41 PM |