GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 12-10-2016, 11:25 AM
mrfreezer mrfreezer is offline
Member
 
Join Date: Nov 2016
Posts: 67
Default EC 250 2008 Ohlins setting

Hi guys.. I have bought GG EC 250 2008 with full ohlins suspension.. Today I have tried to check SAG... I have 35mm free SAG on the front and 55mm rider SAG... My weight is 72kg and when I ride single tracks I can bottom the front fork when I go down steep downhil and hit bottom of it... I have checked ohlins fork manual and it says that preload can be set by changing spring support... What should I do with it... rider SAG too low... but bottoming fork... do you guys think decreasing preload and increasing oil level should help??

Next question is about ohlins shock... I have free sag of 20mm and rider sag 60mm... I tried to loosen lock nut on shock, but it is too tight... I have found out, the thread on shock has 2mm gap in the middle.. Can I go with nuts through this gap??

Edit: I have loosened the lock nut and set rear spring preload to 37mm free sag and 100mm rider sag and than loosened bolt in front triples as they were tightened very hard... now front free sag is 37mm and 81mm rider sag... so everything is great now... Now just want to know what to do with the fork bottoming... higher oil level?? how many mililiters of oil to add??



Last edited by mrfreezer; 12-10-2016 at 12:46 PM.
Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2012/2013 Zoke/Ohlins Stock Suspension Setting jaysktms Enduro Suspension 13 12-18-2012 09:38 AM
tourque setting bonkeye Enduro Engine - 2 stroke 3 11-24-2012 06:07 PM
Sag setting question Synergy-Seals Enduro Suspension 4 10-25-2011 05:40 AM
baseline ohlins setting fullthrottle Enduro Suspension 5 04-26-2008 09:15 AM




All times are GMT -5. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org