|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
How to setup the carb mix on a 2001 ec300
Anyone have any diagrams or pictures on setting up a carb ie how many turns in and out.
|
#2
|
||||
|
||||
Check out this link for info on tuning carb, its a scooter site but the information should be universal.
http://scootrs.com/tech.cfm?tip=tunecarb Maybe some of you tuners can check it out and see if its good info or not. I just got in some pilot jets from Mark at Go Fasters and was going to try and tune according to info I found and see if it works. The weather is going from low 70's to 60's but it should get a little colder before winter is past so i'm going to concentrate on getting my jetting right and making notes for future use. Here is another link that should have some more info that will be helpful.http://www.keihincarbs.com/tips/gate.html also check here http://www.gasgasrider.org/forum/forumdisplay.php?f=15 Good Luck Ron ECDE200 2004 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
08 EC300 setup MX & Enduro | AdrenalineJunky | Enduro Suspension | 4 | 06-03-2010 09:41 AM |
Carb model on 04 ec300? | socalscott | Enduro Engine - 2 stroke | 4 | 01-12-2010 06:40 AM |
The best light setup for an 07 Ec300??? | wence | Enduro Electrical & Wiring | 9 | 03-25-2009 08:42 AM |