|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Wheel/Wheel Bearing?
I have a 03 MC250 that I have recently got a 18" rear wheel from a 01 XC 300 that the bearings are going out. I have a spare set of bearings for the stock wheel.
Will the bearings work? I was planing on just swapping the spacers from the stock wheel. Will I have to get another washer to go between the two bearings? Thanks for any help.
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#2
|
||||
|
||||
I am certain the wheel bearings will interchange between the hubs.
I have an '08, but liked the D.I.D. U rims, so I have a set of '01 wheels on my bike. All it took was changing out the wheel bearings and spacer from the '08 wheels, into the '01 wheels. You should be fine.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
#3
|
||||
|
||||
Did you put the washer in the 01 wheel as I understand it those did not come with the washer.
__________________
02 EC 200 03 MC 250 88 VT 800 01 TXT 280 |
#4
|
||||
|
||||
I have wheels of all vintages. The fronts yes, but the rears no. The '03+ rear wheels have different bearings and sprocket side spacers than the '01. The washer with the shoulder is necessary to maintain the thrust across the inner races of the two stacked sprocket side bearings.
|
#5
|
||||
|
||||
I simply disassembled the '08 bearing and spacer assembly and put it in the '01 rear wheel. It was a direct crossover. The axle is a lot larger in diameter, so you have to change every piece, but the hub is exactly the same, just the inner diameter of the bearings.
__________________
Mike Sheetz OMRA #21AA What will I be riding next? Christini GG 300? '15 KTM 300 XC-W '08 EC 250 (Gone to new happy owner) Gran Prix Cycle LTR Suspension RB-Designs |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Diameter of front wheel bearing? | Todd5774 | Enduro Chassis & Body | 3 | 02-02-2011 10:13 AM |
Wheel bearing replacement | bchatt | Enduro Chassis & Body | 2 | 01-13-2011 08:37 PM |
Front wheel bearing life | roostafish | Enduro Chassis & Body | 11 | 12-27-2010 11:55 AM |
05 250 front wheel bearing seal #??? | Bandit9 | Enduro Chassis & Body | 3 | 10-29-2007 06:49 PM |
Rear wheel bearing ? | ktmguy23 | Enduro Chassis & Body | 1 | 03-22-2007 06:45 AM |