Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-17-2020, 02:11 PM
ian1987 ian1987 is offline
Member
 
Join Date: Apr 2018
Posts: 12
Default Clutch issues when warm

My 2008 EC300 clutch works fine but after long extreme sections or climbs when I?m slipping the clutch a lot it seems to ?fade? and I get a lot of free play in the lever.

I know my basket is starting to get notched but I don?t think this is related


Reply With Quote


  #2  
Old 05-07-2021, 01:20 PM
steliost's Avatar
steliost steliost is offline
Platinum Level Site Supporter
 
Join Date: May 2012
Location: Northern Greece
Posts: 73
Default

Same here. last ride I used a lot of second gear where i should have first and slipped the clutch more than usual. I had this excessive free play at the lever which slowly went back to normal the less I used it. when the bike cooled down it went totally normal and stayed like that for the rest of the day, of course I was easier on it after the incident. The fluid in the tank is long due for a change, maybe plays a part? I'll do it tomorrow. Has it something to do with the slave cylinder or the basket, or is it normal?
Reply With Quote
  #3  
Old 05-07-2021, 03:10 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,070
Default

Change fluid for sure.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #4  
Old 05-17-2021, 11:09 AM
steliost's Avatar
steliost steliost is offline
Platinum Level Site Supporter
 
Join Date: May 2012
Location: Northern Greece
Posts: 73
Default

Turns out that I had fluid missing from the tank, it was below the middle of the looking glass. probably leaking from the piston seal as it happens very often... I just filled it up with fluid and went riding the same way to reproduce the incident but it was good all day through. today I finally did a proper flush and refill with dot4 (and did a trans oil change too). great ride yesterday!
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Clutch Issue, intermittent on warm bike... BLD Enduro Engine - 2 stroke 5 10-08-2017 07:06 PM
Clutch issues EC250 Enduro Engine - 2 stroke 6 06-20-2016 08:26 AM
Clutch issues Trigga Enduro Engine - 2 stroke 3 09-08-2014 02:23 PM
2012 Ec250 Clutch issues... Novascotiarider Enduro Engine - 2 stroke 9 05-07-2013 12:50 PM
300 hard starting warm Having some carb issues. Ed Ventura Enduro Intake/Carburetion - 2 stroke 1 03-11-2012 08:12 PM




All times are GMT -5. The time now is 06:30 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org