|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2014 XC250 rear wheel bearings
I am finding so many different options. Some lots have 3 bearings, some have two, all are different sizes. I believe 13-14 share the same bearings but no other years?
Does anyone have a solid answer on what I need? Sizes or part numbers? |
#2
|
|||
|
|||
Quote:
Take the bearing numbers and do yourself a favour....buy quality Japanese bearings....NSK, NTN, KYB. Any shop selling Japanese bearings will be able to match the bearing based on the above parts fiche. |
#3
|
||||
|
||||
03-15 rear are all the same wheel bearings, 3 bearings 6004x2 6005x1
You can go cheap or better quality, I go cheap in the winter slop. https://www.ebay.com/itm/New-Connect...53.m1438.l2649 https://www.gasgaspartsguy.com/WHEEL...talogId=-15678 careful you don't damage the step washer and alum spacer between bearings.
__________________
15 GASGAS EC 250 19 Sherco SE 125R |
#4
|
||||
|
||||
To get longer bearing life, I use one of these grease gun needles to fill the bearing with marine grease. If you are careful you an slip the point under the seal by the inner race. I arrange the bearing so that seal is located on the inside of the hub.
https://www.ebay.com/p/Plews-05-037-...d=282444820630 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear wheel bearings | Wes32 | Trials Chassis & Body | 1 | 10-23-2016 10:49 PM |
Rear wheel bearings on 03 | kendunn | Enduro Chassis & Body | 8 | 01-06-2011 05:43 PM |
Rear Wheel Bearing 2001 XC250 | thomasbyrd | Enduro Chassis & Body | 0 | 10-04-2009 02:04 PM |
Rear Wheel Bearings | cladoo | Enduro Chassis & Body | 2 | 11-18-2008 10:14 AM |
rear wheel bearings | smithys ec250 | United Kingdom | 3 | 04-23-2008 04:01 PM |