Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-25-2010, 11:02 PM
Evans P Evans P is offline
Member
 
Join Date: Jul 2009
Location: UK. South Wales
Posts: 2
Default Running rich

I have a 2005 ec250. Main jet 178, pilot 38, needle type N1EF clip positioned in centre. The bike runs runs well but rich and can fowl plugs. The bike is used only for trail riding so mostly on less than half throttle. Any advise would be welcome.


Reply With Quote


  #2  
Old 02-26-2010, 05:53 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

check the jetting "sticky". A needle change is most likely needed.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #3  
Old 02-26-2010, 12:50 PM
woody1965's Avatar
woody1965 woody1965 is offline
Member
 
Join Date: Sep 2009
Location: devizes uk
Posts: 26
Default

i have a 03 and had same problem ..set needle to second from top and air screw at 2.5 turns out runs ok now ..
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone Running Engine Ice? lordfeyr Enduro Other... 14 06-25-2011 10:16 PM
Running hot Brian VT Enduro Engine - 2 stroke 9 10-01-2008 07:25 AM
02 400 fse running prob dan j Enduro Engine 4 stroke (including EFI & Exhaust) 3 08-14-2008 05:44 AM
Running rich rustygun Enduro Engine - 2 stroke 4 06-20-2008 04:18 PM
Running In Dingo Enduro Engine - 2 stroke 3 07-26-2007 11:36 PM




All times are GMT -5. The time now is 06:11 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org