#1621
|
||||
|
||||
Applied some purty darn sweet graphics on my Son's 02' 250 XC (W/05' plastic) this morning. Next time I'll lay off the coffee so heavy in the A.M.-
was a bit jittery trimming that last shroud decal... Can I post pics from iPhone?
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
#1622
|
||||
|
||||
Don't know about iPhones, but on my Andriod I can post pictures. I am using the tapatalk app to acces this (and other) forums.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1623
|
||||
|
||||
05180CD8-C848-4810-BF5B-AFB63AA5E274.jpg
084C5EF3-BF34-469F-B450-2923029B1940.jpg EEB1922D-37DC-4D63-BF31-73968EFE217C.jpg Guess you can teach an old dog new tricks... THANKS ANDERS
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
#1624
|
||||
|
||||
That looks really nice! Be sure to post some images of the finished bike as well
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#1625
|
|||
|
|||
I got sick of taking the swingarm off to grease it. Drastic action was required
|
#1626
|
||||
|
||||
Well Done!
__________________
Jim Cook Smackover Racing Team LAGNAF '11 Gas Gas EC250 (primary ride) '06 Gas Gas DE300 2004 Gas Gas TXT300 Pro '94 Husaberg FE350 '86 Yamaha IT200 '86 Honda TRL200 Reflex '04 KTM 525EXC (soon to be dual sported) Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes Let's go riding! http://www.jebruns.com/Wudi19/wudi19.html http://www.ahrma.org/schedules-results/cross-country/ |
#1627
|
|||
|
|||
Thanks Jim. the linkage wasn't too bad but swingarm took a while as I had to push the bearings out and position them as far to the outside of the arms as possible and on the chain side, cut a groove to allow the grease to get between the bearings.
still, saving time and money in the long term I'm sure. |
#1628
|
|||
|
|||
Not Today, but a few days ago.
I live sort of on the edge of a rural area and the suburbs. I rode my (non plated) ec300 down the road for a few miles, mostly on the shoulder so as to not cause too much trouble.
At one point I came upon an area where the ground had been built up to allow the roadway to be flat and level. As a result, there wasn't really a shoulder, and a pretty steep drop off into a swampy area. As I was riding along the shoulder and noticing there was about to not be a shoulder to ride on, I looked over my shoulder to see if any cars were coming so I could hop on the road for a short blast to get past the swampy area. Wouldn't you know it, doing so caused me to get off balance and veer off the steep slope into the swamp! No harm done to me or the bike, but it was an interesting struggle trying to get up a gravely 60 degree slope with no run up. I ended up scooting along the bottom, dodging the deep spots and trees until I came to an easier place to ascend. I continued exploring around, checking out power lines and avoiding No Trespassing signs. As I was on my way home, I saw a policeman sitting there as a speed trap I suppose. Luckily I wasn't gooning too much and just sort of tooted along and gave him a nod. He didn't come after me, so thats good. Besides the short gearing, the bike did fine on the road and makes me wish I had a plate just for exploring around like that. Figured I'd share my anecdote since the thread is 'What did you to do your Gas Gas today?' |
#1629
|
||||
|
||||
Quote:
Good Riding to You! Jim .
__________________
Jim Cook Smackover Racing Team LAGNAF '11 Gas Gas EC250 (primary ride) '06 Gas Gas DE300 2004 Gas Gas TXT300 Pro '94 Husaberg FE350 '86 Yamaha IT200 '86 Honda TRL200 Reflex '04 KTM 525EXC (soon to be dual sported) Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes Let's go riding! http://www.jebruns.com/Wudi19/wudi19.html http://www.ahrma.org/schedules-results/cross-country/ |
#1630
|
||||
|
||||
I?ve tried over the years to buy one of these to no avail. Had a chat with Jeff Fredette at a Muddobbers national reset, he told me he won?t run a bike without, less pad wear, runs cooler and more feel. Finally snagged the OEM part as I figured the stock slotted one last so long why not stick with that quality.
__________________
TeamFlannelOutdoors-somewhere South of I80 05' Gas Gas 300 DE (Son's) 22' Rieju MR300 80th Anniversary Edition. 02' Gas Gas 250 XC Moto Farm motor and suspension service 309 310 2540 leave a message www.halls-cycles.com |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNF today | Pepperami | Enduro Chassis & Body | 6 | 09-18-2013 11:59 AM |
Got my first GG today! | RonMexico | General Discussions & Announcements | 6 | 02-19-2011 12:39 PM |
Went Riding Today and..... | coolum74 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 11-30-2008 01:12 PM |
HELP! I tried to use my gasgas as a jet ski today! | sammyj18 | General Discussions & Announcements | 19 | 11-21-2008 08:01 PM |
SHNF From Today | Boomhauer | Pictures & Videos | 13 | 10-30-2007 04:18 PM |