|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Side panel mounting screws & grommets: 07 EC 300
Least favorite aspect of my EC 300 so far: side panel mounting.
The head on one of the plastic screws was broken off, so I had to drill it out - destroying the plastic grommet in the process - to get the panel off. For reference, the side panels have 3 connections each: 2 x 7mm hex head screws which are also slotted for a flat head screw driver, and 1 x grommet and plastic screw. The 7mm hex heads are accessed from the forward-facing side of the subframe, whereas the plastic screws/grommets are access from the back-side. I looked through the parts diagrams on GoFasters, but couldn't identify what part number I need to replace. The "plastics" diagram doesn't even show the side panels. Does anyone know the right part or a suitable replacement? I've attached a picture of the grommet - with a key for perspective. |
#2
|
||||
|
||||
|
#3
|
|||
|
|||
Most cars today are full of em. Go find one off your cars interior. Or put a captive speed nut behind it and screw into it
http://www.rageem.com.au/Products/Sp...peed_nuts.html
__________________
"It's Nature that Brings out the Madness" GasGas FSR450 07' |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Silencer Grommets | HydroDog | General Discussions & Announcements | 6 | 06-02-2010 05:50 PM |
2005 Side panel stickers wanted | stay_upright | Enduro Chassis & Body | 2 | 07-28-2009 06:46 PM |
2007 owners - side panel question | Shiny | Enduro Chassis & Body | 2 | 10-29-2007 01:26 PM |
Side Panel Plastics | gasIdaho | Enduro Chassis & Body | 3 | 03-06-2007 12:06 PM |
Side Panel | mc25003 | Enduro Chassis & Body | 1 | 11-11-2006 01:39 PM |