Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-24-2012, 11:30 AM
Racing616 Racing616 is offline
Member
 
Join Date: Nov 2011
Location: Denver, CO
Posts: 20
Default 2012 300/250 - light harness removal

A note for everyone who will be removing the lighting stuff. When you put it back together, insure that every wire coming from the CDI has a home. When we put it back together there was a lone male spade on a black/white wire that had been connected in the lighting harness. We left it unplugged and there is no spark in the bike. Simply create a mini harness (female spade, wire and a circular ground piece) run it to the coil ground location and your bike will run as intended. This did catch me by surprise as I kicked, kicked, kicked, kicked.......


__________________
Brad Hendry
Denver, CO

RMEC #21A
RMXA #616

http://www.coloradoeuro.com/
http://www.foothillsbmw.com/Default.asp

MOTOADVENTURE / GasGas / NORTHERN COLORADO EURO / FOOTHILLS BMW-TRIUMPH / STM SUSPENSION / FLY / DP BRAKES / ENDURO ENGINEERING / REKLUSE / FMF
Reply With Quote


  #2  
Old 01-06-2018, 06:41 PM
300ecraceman 300ecraceman is offline
Member
 
Join Date: Jun 2014
Location: Arkansas
Posts: 6
Default

Thanks a million
__________________
2012 ec race 300
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Key Removal arminhammer Enduro Electrical & Wiring 11 11-07-2011 07:14 PM




All times are GMT -5. The time now is 10:20 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org