Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #11  
Old 01-15-2018, 03:07 PM
AAH AAH is offline
Member
 
Join Date: Mar 2017
Location: Northern NSW Australia
Posts: 10
Default

Thanks for the replies. I have ground the tack weld off the back of the plate and punched out the remains of the pin. I will just tack a bolt in place and make a bush to suit.
I had ordered the part from Scotties but he said he was unable to get the part from Gasgas. Hope the parts situation improves soon. Seems the new importer is only interested in moving new bikes.


Reply With Quote


  #12  
Old 01-15-2018, 03:19 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by AAH View Post
Thanks for the replies. I have ground the tack weld off the back of the plate and punched out the remains of the pin. I will just tack a bolt in place and make a bush to suit.
I had ordered the part from Scotties but he said he was unable to get the part from Gasgas. Hope the parts situation improves soon. Seems the new importer is only interested in moving new bikes.
Did you try contacting Jeff (the old importer) directly. While he's no longer affiliated with Gas Gas officially he was left holding all the stock he had. He may/may not have the particular part, but couldn't hurt to ask.
Reply With Quote
  #13  
Old 01-15-2018, 03:49 PM
AAH AAH is offline
Member
 
Join Date: Mar 2017
Location: Northern NSW Australia
Posts: 10
Default

I thought I had read somewhere that Jeff had sold the remaining stock to the new importer. I did order some parts from him when he was selling off stock at 50% off but I got in a little late and didn't get all that I ordered.
At this point i'm happy with fixing the old part, but if I doesn't work out I will contact Jeff.
Reply With Quote
  #14  
Old 01-16-2018, 02:45 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

I don't actually know what he's got left in stock.. but has to have at least a couple things. I had a few dollars credit remaining from the 50% clearance where I'd paid for bits that he'd run out of. He sent me something else I'd enquired about for Christmas.

Really just depends what he was holding and not. I don't imagine the 50% clearance would have had people jumping for actuator plates (but you never know); more likely just at the consumables and plastics, etc.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ec 300 power valve Jonisaacson17 Enduro Engine - 2 stroke 11 07-18-2016 09:01 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 09:56 AM
power valve nut bonkeye Enduro Engine - 2 stroke 4 10-11-2012 06:40 PM
Is this power valve lever plate wrong? mark250ec Enduro Engine - 2 stroke 2 09-06-2011 05:39 PM
Power valve bens25au Enduro Engine - 2 stroke 2 02-09-2008 11:02 PM




All times are GMT -5. The time now is 06:02 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org