Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #21  
Old 03-24-2019, 04:34 AM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

Found two members on here at sea level running 180 main and 38 pilot. I drained out the fuel and cleaned out the carb. I?ll give it a shot and see what happens.🤞🏽


Reply With Quote


  #22  
Old 03-26-2019, 09:30 PM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

Ok guys. Here?s what I tested. I ended up using the original needle that was in it already, N8RW 2nd clip. Air screw 1.5 turns. 158 main 38 pilot jets. Very light sputter off idle. Pulls hard to wot. Next, I moved the clip to the first slot. Same jets but with the air screw 2.5 turns. Sputter is gone still pulls hard wot. I think I?ve found my sweet spot. I also noticed the plug that?s in it now is a BR7ES. I think the correct plug is BR8EG. I?m gonna put a new plug in it ride it a bit and check the plug and see how she burns.
Reply With Quote
  #23  
Old 03-27-2019, 12:39 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Not familiar with that needle but anything must be better than stock.

Geez that is a small main. I'd hate you to hole up a piston.

Common misconception ; a plug chip will only tell you about the main jet, and only if you follow a certain procedure. Just looking at a plug tells you nothing useful. You could be dangerously lean near closed and also at wide open but stupidly rich mid throttle and a dirty plug as you come back into the pits tells you? ! #?
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #24  
Old 03-27-2019, 01:06 AM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

I tried a 170 but it didn?t run good. I?m gonna try a 160 and see what happens.
Reply With Quote
  #25  
Old 04-06-2019, 04:37 PM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

I think I'm just gonna go with a Lectron or smart carb. I checked with smart carb and they're coming out with a new SC2 billet carb. Price? $699. Cast will be $474. It's a little pricey for the billet one. I'll do a little more research and comparisons on the Lectron and cast smart carb to decide which one to purchase.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reed valve spacer... motopsycho87 Enduro Intake/Carburetion - 2 stroke 6 08-03-2016 07:28 AM
What reed valve in 2000 EC300 Robert127 Enduro Intake/Carburetion - 2 stroke 4 02-16-2016 06:41 AM
reed valve crossover mc 2000 mikevancapel Enduro Engine - 2 stroke 3 01-21-2013 10:06 PM
Vfrorce reed valve? blanc Enduro Intake/Carburetion - 2 stroke 33 06-30-2012 07:12 PM




All times are GMT -5. The time now is 08:46 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org