|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
My Introduction
Hello all. I've been creeping the forums for awhile now and figured I'd finally post up. I started by digging for info on gasgas's, which in turn sold me on them and I was lucky to pick one up. I'm in Missouri and picked up a new leftover 2012 ec300r from Motorcycles and More Inc. in Marthasville where they made the experience very enjoyable. Now on to the bike, I really dig it. I am coming from a wr250r and a kdx200, and the power and finesse is amazing in comparison. Only 2 hard rides on it with some gnarly hill climbs and some tighter snow covered single track and its done very well, no major issues yet. Only thing that has came up is you all aren't blowing smoke about the kickstart levers because mine just broke on the last ride and a broken kickstand bolt. We've had colder than normal temps here and I'm giving her some slack since I took her out. Other than that I've just been riding. Here is a video clip from last weekend at a snowy Briggs Training Facility, it's a sony action cam and sticks way out so you get a lot of handlebar when it gets steep.
http://www.youtube.com/watch?v=Xp1D7HFuzIc |
#2
|
||||
|
||||
First post AND a video ! Great stuff..........
Many congrats on the new weapon, and welcome to the site. We normally get snow most winters here in the UK and usually i hate it. Now i ride off-road and was looking forward to it, we dont get a single flake !
__________________
Regards Shuv - 2006 EC 250 |
#3
|
||||
|
||||
Welcome to the GG family. Sorry to hear about the broken kick starter. I wonder if the cold temperature made it brittle and more susceptible to breakage. I know several on here have had broken kickstarters. I have a 2011 and have never had a problem that way (watch...now the next time I ride, it'll break!) The more you personalize the bike to your liking, the more you will love it. They are great bikes. Again, welcome, glad to have another smart rider on board.
__________________
Alan 14GasGas ec300r |
#4
|
||||
|
||||
Welcome aboard! The bending of the side stand bolts are well recorded. I plan to take my side stand off. The kick starter would likely be a poor casting, and should be able to be claimed under warranty. If put in the position where it'll cost, get yourself a YZ250 kicker, and call it done! Its a much better kicker all round.
Take the time to go through the bike and iron out all the little bugs.. You will likely find a few more things that will need some attention during the honeymoon period. She might test you at times, but after that its all smooth sailing. If you haven't done it yet, chase up some tuning threads and you'll take the engine to a whole new level of bliss. |
#5
|
||||
|
||||
Listen to that Power Valve pur Welcome aboard
__________________
15 Beta 300RR Race Sold KTM 450EXC now moving over to RED! Looks like I found the right bike. Thanks REVERUP! 2011 GasGas EC300 "Stolen By A Scum Bag" 2009 450EXC Sold to Rapid Dog EURO Factory Anti-Hop slipper clutch, GPR V4, Akropovic Full Ti Exhaust, 2013 suspension and wheels. 2009 300XC 2005 525 MXC 2000 WR 400 1996 XR 600 1987 CR500 1990 KX500 |
#6
|
||||
|
||||
Welcome! Thx for buying one of our bikes!
|
#7
|
|||
|
|||
Welcome aboard. Yeah the kickers are pretty soft. Get yourself a late model yz250 kicker and you will be good to go. As for the side stand, I yanked mine off and put it in the parts bin. It didn't break but I could hear it flopping around on hard hits.
Thanks for the video and keep it pinned......:-D |
#8
|
||||
|
||||
Thanks everyone! This Saturday it is warming up so I am going to go through everything and put some proper handguards on. Like I said I've been creeping awhile and have came across the yz solution and ordered one that day. Might still pursue a warranty on the stocker though for a backup. It broke right at the foot part, the arm and connection to the shaft are fine. Going to seal up the airbox, check tank swelling??, subframe, and torque everything down. Any other 2012's issues I might need to check and any tips on stopping the seat chatter (I've read velcro). Forgot to mention the best mod, it has a plate!
|
#9
|
|||
|
|||
You're going like the 300 in the Missouri rocks! Get ready to buy a lot of tires
|
#10
|
||||
|
||||
Welcome!
__________________
-Mike 2009 Beta Evo 300 4T - 1982 Suzuki PE175 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2014 GG Video Introduction | Mark Berg - CPD | General Discussions & Announcements | 6 | 09-26-2013 01:20 PM |
Introduction: EC200 and EC250 in Upper Michigan | j_franich | General Discussions & Announcements | 7 | 07-02-2013 04:44 PM |
Brief Introduction | tomatoe333 | General Discussions & Announcements | 7 | 01-21-2009 05:19 PM |
A short Introduction....Finally | lukachuki | General Discussions & Announcements | 3 | 08-28-2007 07:02 PM |